The new flashcard feature is useful to memorize questions.
?Change your study mode
At any time, you can change the study mode, and alternate between the practice mode and the exam mode. In practice mode, you can configure for example the number of questions or tests, and other parameters to help you study.
Randomized | 10 Questions per Test | 20 Minutes | 70% to pass|
To re-configure your study mode again and change - for example - the number of tests, whether you have random questions and all other configuration parameters.
?Simulator Configuration
Auto-scroll: You can use the automatic scrolling of the questionnaire that occurs as soon as you answer one or all of the answers to a question correctly. Auto scrolling is activated if you answer a single answer, or as soon as you answer all the mandatory answers. Learning Mode: During learning mode you can get a real time result for your answer.
Free Test
Question: / 10
20:00Min. left
?Restart the current test
To restart the current test by clearing all your answers and the time used up to now. Warning: all answers will be lost.
Question: / 10
4.8(1178 Votes)
Quiz
Question 1/101/10
Which design consideration must be made when using IPv6 overlay tunnels?
Select the answer:Select the answer
1 correct answer
A.
Overlay tunnels that connect isolated IPv6 networks can be considered a final IPv6 network architecture.
B.
Overlay tunnels should only be considered as a transition technique toward a permanent solution.
C.
Overlay tunnels can be configured only between border devices and require only the IPv6 protocol stack.
D.
Overlay tunneling encapsulates IPv4 packets in IPv6 packets for delivery across an IPv6 infrastructure.
Https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/interface/configuration/xe-3s/ir-xe-3s- book/ip6-ip4-gre-tunls-xe.pdf "The use of overlay tunnels should be considered as a transition technique toward a network that supports both the IPv4 and IPv6 protocol stacks or just the IPv6 protocol stack."
Right Answer: B
Quiz
Question 2/102/10
Which solution allows overlay VNs to communicate with each other in an SD-WAN Architecture?
Select the answer:Select the answer
1 correct answer
A.
External fusion routers can be used to map VNs to VRFs and selectively route traffic between VRFs.
B.
GRE tunneling can be configured between fabric edges to connect one VN to another.
C.
SGTs can be used to permit traffic from one VN to another.
D.
Route leaking can be used on the fabric border nodes to inject routes from one VN to another.
Right Answer: B
Quiz
Question 3/103/10
An engineer must design a VPN solution for a company that has multiple branches connecting to a main office. What are two advantages of using DMVPN instead of IPsec tunnels to accomplish this task? (Choose two.)
Select multiple answer: (Choose 2)Select the answer
2 correct answers
A.
support for AES 256-bit encryption
B.
greater scalability
C.
support for anycast gateway
D.
lower traffic overhead
E.
dynamic spoke-to-spoke tunnels
Right Answer: B, E
Quiz
Question 4/104/10
Which NETCONF operation creates filtering that is specific to the session notifications?
Select the answer:Select the answer
1 correct answer
A.
<create-subscription>
B.
<commit>
C.
<notification>
D.
<logging>
Right Answer: A
Quiz
Question 5/105/10
What is a benefit of using VRRPv3 as compared to VRRPv2?
Select the answer:Select the answer
1 correct answer
A.
VRRPv3 supports IPv4 and IPv6
B.
VRRPv3 supports authentication
C.
VRRPv3 supports preemption
D.
VRRPv3 supports stateful switchover
Right Answer: D
Quiz
Question 6/106/10
Which QoS feature responds to network congestion by dropping lower priority packets?
Select the answer:Select the answer
1 correct answer
A.
CBWFQ
B.
tail drop
C.
WRED
D.
strict priority
Right Answer: C
Quiz
Question 7/107/10
Which two BGP features will result in successful route exchanges between eBGP neighbors sharing the same
AS number? (Choose two.)
Select multiple answer: (Choose 2)Select the answer
2 correct answers
A.
advertise-best-external
B.
bestpath as-path ignore
C.
client-to-client reflection
D.
as-override
E.
allow-as-in
Right Answer: D, E
Quiz
Question 8/108/10
A company is running BGP on a single router, which has two connections to the same ISP. Which BGP feature ensures traffic is load balanced across the two links to the ISP?
Select the answer:Select the answer
1 correct answer
A.
Multihop
B.
Multipath Load Sharing
C.
Next-Hop Address Tracking
D.
AS-Path Prepending
Right Answer: B
Quiz
Question 9/109/10
Which design consideration should be observed when EIGRP is configured on Data Center switches?
Select the answer:Select the answer
1 correct answer
A.
Perform manual summarization on all Layer 3 interfaces to minimize the size of the routing table.
B.
Prevent unnecessary EIGRP neighborships from forming across switch virtual interfaces.
C.
Lower EIGRP hello and hold timers to their minimum settings to ensure rapid route reconvergence.
D.
Configure multiple EIGRP autonomous systems to segment Data Center services and applications.
Right Answer: A
Quiz
Question 10/1010/10
When a network is designed using IS-IS protocol, which two circuit types are supported? (Choose
two.)
Select multiple answer: (Choose 2)Select the answer
300-420: Designing Cisco Enterprise Networks Practice test unlocks all online simulator questions
Thank you for choosing the free version of the 300-420: Designing Cisco Enterprise Networks practice test! Further deepen your knowledge on Cisco Simulator; by unlocking the full version of our 300-420: Designing Cisco Enterprise Networks Simulator you will be able to take tests with over 233 constantly updated questions and easily pass your exam. 98% of people pass the exam in the first attempt after preparing with our 233 questions.
What to expect from our 300-420: Designing Cisco Enterprise Networks practice tests and how to prepare for any exam?
The 300-420: Designing Cisco Enterprise Networks Simulator Practice Tests are part of the Cisco Database and are the best way to prepare for any 300-420: Designing Cisco Enterprise Networks exam. The 300-420: Designing Cisco Enterprise Networks practice tests consist of 233 questions and are written by experts to help you and prepare you to pass the exam on the first attempt. The 300-420: Designing Cisco Enterprise Networks database includes questions from previous and other exams, which means you will be able to practice simulating past and future questions. Preparation with 300-420: Designing Cisco Enterprise Networks Simulator will also give you an idea of the time it will take to complete each section of the 300-420: Designing Cisco Enterprise Networks practice test . It is important to note that the 300-420: Designing Cisco Enterprise Networks Simulator does not replace the classic 300-420: Designing Cisco Enterprise Networks study guides; however, the Simulator provides valuable insights into what to expect and how much work needs to be done to prepare for the 300-420: Designing Cisco Enterprise Networks exam.
300-420: Designing Cisco Enterprise Networks Practice test therefore represents an excellent tool to prepare for the actual exam together with our Cisco practice test . Our 300-420: Designing Cisco Enterprise Networks Simulator will help you assess your level of preparation and understand your strengths and weaknesses. Below you can read all the quizzes you will find in our 300-420: Designing Cisco Enterprise Networks Simulator and how our unique 300-420: Designing Cisco Enterprise Networks Database made up of real questions:
You can prepare for the 300-420: Designing Cisco Enterprise Networks exams with our mobile app. It is very easy to use and even works offline in case of network failure, with all the functions you need to study and practice with our 300-420: Designing Cisco Enterprise Networks Simulator.
Use our Mobile App, available for both Android and iOS devices, with our 300-420: Designing Cisco Enterprise Networks Simulator . You can use it anywhere and always remember that our mobile app is free and available on all stores.
Our Mobile App contains all 300-420: Designing Cisco Enterprise Networks practice tests which consist of 233 questions and also provide study material to pass the final 300-420: Designing Cisco Enterprise Networks exam with guaranteed success.
Our 300-420: Designing Cisco Enterprise Networks database contain hundreds of questions and Cisco Tests related to 300-420: Designing Cisco Enterprise Networks Exam. This way you can practice anywhere you want, even offline without the internet.