20:00

PDF|

Guide for FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer

Quiz FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer

Free Test
/ 10

Quiz

1/10
Consider the scenario where the server name indication (SNI) does not match either the
common name (CN) or any of the subject alternative names (SAN) in the server certificate.
Which action will FortiGate take when using the default settings for SSL certificate
inspection?
Select the answer
1 correct answer
A.
FortiGate uses the SNI from the user's web browser.
B.
FortiGate closes the connection because this represents an invalid SSL/TLS configuration.
C.
FortiGate uses the first entry listed in the SAN field in the server certificate.
D.
FortiGate uses the CN information from the Subject field in the server certificate.

Quiz

2/10
Exhibit.

Certification Exam FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Fortinet Fortinet-FCSS_NST_SE-7.6 1-3201615757

Refer to the exhibit, which contains partial output from an IKE real-time debug.
Which two statements about this debug output are correct? (Choose two.)
Select the answer
2 correct answers
A.
Perfect Forward Secrecy (PFS) is enabled in the configuration.
B.
The local gateway IP address is 10.0.0.1.
C.
It shows a phase 2 negotiation.
D.
The initiator provided remote as its IPsec peer ID.

Quiz

3/10
Exhibit.
Certification Exam FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Fortinet Fortinet-FCSS_NST_SE-7.6 2-4799791

Refer to the exhibit, which shows the output of a diagnose command.
What can you conclude about the debug output in this scenario?
Select the answer
1 correct answer
A.
The first server provided to FortiGate when it performed a DNS query looking for a list of rating servers, was 121.111.236.179.
B.
There is a natural correlation between the value in the FortiGuard-requests field and the value in the Weight field.
C.
FortiGate used 64.26.151.37 as the initial server to validate its contract.
D.
Servers with a negative TZ value are less preferred for rating requests.

Quiz

4/10
Refer to the exhibit, which shows the output of a policy route table entry.

Certification Exam FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Fortinet Fortinet-FCSS_NST_SE-7.6 3-3504067579

Which type of policy route does the output show?
Select the answer
1 correct answer
A.
An ISDB route
B.
A regular policy route
C.
A regular policy route, which is associated with an active static route in the FIB
D.
An SD-WAN rule

Quiz

5/10
Exhibit.
Certification Exam FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Fortinet Fortinet-FCSS_NST_SE-7.6 4-3497903866

Refer to the exhibit, which shows a FortiGate configuration.
An administrator is troubleshooting a web filter issue on FortiGate. The administrator has
configured a web filter profile and applied it to a policy; however the web filter is not
inspecting any traffic that is passing through the policy.
What must the administrator do to fix the issue?
Select the answer
1 correct answer
A.
Disable webfilter-force-off.
B.
Increase webfilter-timeout.
C.
Enable fortiguard-anycast.
D.
Change protocol to TCP.

Quiz

6/10
Exhibit 1.

Certification Exam FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Fortinet Fortinet-FCSS_NST_SE-7.6 5-3668252420



Exhibit 2.

Certification Exam FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Fortinet Fortinet-FCSS_NST_SE-7.6 6-2178263501

Refer to the exhibits, which show the configuration on FortiGate and partial internet session
information from a user on the internal network.
An administrator would like to lest session failover between the two service provider connections.
Which two changes must the administrator make to force this existing session to immediately start
using the other interface? (Choose two.)
Select the answer
2 correct answers
A.
Change the priority of the port1 static route to 11.
B.
Change the priority of the port2 static route to 5.
C.
Configure unset snat-route-change to return it to the default setting.
D.
Configure set snat-route-change enable.

Quiz

7/10
Refer to the exhibit, which shows the output of a debug command.
Certification Exam FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Fortinet Fortinet-FCSS_NST_SE-7.6 7-1566791710


Which two statements about the output are true? (Choose two.)
Select the answer
2 correct answers
A.
The interlace is part of the OSPF backbone area.
B.
There are a total of five OSPF routers attached to the vorz4 network segment
C.
One of the neighbors has a router ID of 0.0.0.4.
D.
In the network connected to port4, two OSPF routers are down.

Quiz

8/10
Refer to the exhibit.

Certification Exam FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Fortinet Fortinet-FCSS_NST_SE-7.6 8-561669949

Which three pieces of information does the diagnose sys top command provide? (Choose three.)
Select the answer
3 correct answers
A.
The miglogd daemon is running on CPU core ID 0.
B.
The diagnose sys top command has been running for 18 minutes.
C.
The miglogd daemon would be on top of the list, if the administrator pressed m on the keyboard.
D.
The cmdbsvr process is occupying 2.4% of the total user memory space.
E.
If the neweli daemon continues to be in the R state, it will need to be manually restarted.

Quiz

9/10
Refer to the exhibit, which shows the output o! the BGP database.
Certification Exam FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Fortinet Fortinet-FCSS_NST_SE-7.6 9-423267929

Which two statements are correct? (Choose two.)
Select the answer
2 correct answers
A.
The advertised prefix of 10.20.30.0/24 was configured using the network command.
B.
The first four prefixes are being advertised using a legacy route advertisement.
C.
The advertised prefix of 10.20.30.0/24 is being advertised through the redistribution of another routing protocol.
D.
The output shows all prefixes advertised by all neighbors as well as the local router.

Quiz

10/10
In which two slates is a given session categorized as ephemeral? (Choose two.)
Select the answer
2 correct answers
A.
A UDP session with only one packet received
B.
A UOP session with packets sent and received
C.
A TCP session waiting for the SYN ACK
D.
A TCP session waiting for FIN ACK
Looking for more questions?Buy now

FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Practice test unlocks all online simulator questions

Thank you for choosing the free version of the FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer practice test! Further deepen your knowledge on Fortinet Simulator; by unlocking the full version of our FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Simulator you will be able to take tests with over 131 constantly updated questions and easily pass your exam. 98% of people pass the exam in the first attempt after preparing with our 131 questions.

BUY NOW

What to expect from our FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer practice tests and how to prepare for any exam?

The FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Simulator Practice Tests are part of the Fortinet Database and are the best way to prepare for any FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer exam. The FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer practice tests consist of 131 questions and are written by experts to help you and prepare you to pass the exam on the first attempt. The FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer database includes questions from previous and other exams, which means you will be able to practice simulating past and future questions. Preparation with FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Simulator will also give you an idea of the time it will take to complete each section of the FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer practice test . It is important to note that the FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Simulator does not replace the classic FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer study guides; however, the Simulator provides valuable insights into what to expect and how much work needs to be done to prepare for the FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer exam.

BUY NOW

FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Practice test therefore represents an excellent tool to prepare for the actual exam together with our Fortinet practice test . Our FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Simulator will help you assess your level of preparation and understand your strengths and weaknesses. Below you can read all the quizzes you will find in our FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Simulator and how our unique FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Database made up of real questions:

Info quiz:

  • Quiz name:FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer
  • Total number of questions:131
  • Number of questions for the test:50
  • Pass score:80%

You can prepare for the FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer exams with our mobile app. It is very easy to use and even works offline in case of network failure, with all the functions you need to study and practice with our FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Simulator.

Use our Mobile App, available for both Android and iOS devices, with our FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Simulator . You can use it anywhere and always remember that our mobile app is free and available on all stores.

Our Mobile App contains all FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer practice tests which consist of 131 questions and also provide study material to pass the final FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer exam with guaranteed success. Our FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer database contain hundreds of questions and Fortinet Tests related to FCSS_NST_SE-7.6: Fortinet FCSS - Network Security 7.6 Support Engineer Exam. This way you can practice anywhere you want, even offline without the internet.

BUY NOW