20:00

PDF|

Guide for NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam

Quiz NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam

Free Test
/ 10

Quiz

1/10
Certification Exam NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Nutanix Nutanix-NCSC-Level-1 2-3698608908

For a new AHV cluster installation, a customer has 20 NX-8155-G6 nodes with quad port SFP NICs.
The customer wants to meet the following guidelines:
 Take advantage of all available 10GbE links
 Achieve maximum throughput per VM
 Use of redundant ToR switches
 Fastest reconvergence during link failure
How should the load balancing be configured on the host?
Select the answer
1 correct answer
A.
ovs-vsctl set port br0-up bond_mode=balance-slb ovs-vsctl set port br0-up other_config:bond-rebalance-interval=30000 ovs-vsctl set port br0 tag=10
B.
ovs-vsctl set port br0-up bond_mode=active-backup ovs-vsctl set port br0-up other_config:bond-rebalance-interval=30000
C.
ovs-vsctl set port br0-up bond_mode=balance-slb
D.
ovs-vsctl set port br0-up other_config:lacp-fallback-ab=true ovs-vsctl set port br0-up lacp=active ovs-vsctl set port br0-up bond_mode=balance-tcp

Quiz

2/10
Certification Exam NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Nutanix Nutanix-NCSC-Level-1 4-552337443

During the Foundation imaging process, nodes are successfully imaged, but the cluster creation fails.
Which log should the consultant review to determine the cause?
Select the answer
1 correct answer
A.
service.log
B.
foundation.out
C.
first_boot.log
D.
genesis.out

Quiz

3/10
Certification Exam NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Nutanix Nutanix-NCSC-Level-1 6-3698608908

To prepare for a new Nutanix installation, a consultant downloads the Foundation VM, imports the VM to their Desktop
Virtualization Solution, and powers on the VM. The IPv4 static address on the host workstation and the Foundation VM
have been configured, but pings between them fail.
Which two troubleshooting steps should the consultant perform? (Choose two.)
Select the answer
1 correct answer
A.
Remove and re-import the Foundation VM to ensure the virtual NIC is set to Host-Only.
B.
Verify the virtual NIC in the Foundation VM is bound to the correct physical Host adapter.
C.
Confirm the IP addresses and subnet masks are correct.
D.
Verify the virtual NIC in the Foundation VM is bound to the correct wireless network adapter.

Quiz

4/10
Certification Exam NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Nutanix Nutanix-NCSC-Level-1 8-3698608908

A consultant configures an ESXi cluster which will utilize a vSphere Distributed Switch (vDS). The consultant has just
migrated the first host to the dvSwitch when several alerts appear within Prism Element regarding Host-to-CVM
connectivity.
What is causing these alerts?
Select the answer
1 correct answer
A.
The consultant migrated the CVM Backplane and VM network adapter over to the vDS.
B.
The consultant migrated the CVM svm-iscsi-pg network adapter over to the vDS.
C.
The consultant migrated the CVM Backplane network adapter over to the vDS.
D.
VLAN tags are incorrectly configured on the vDS port groups.

Quiz

5/10
Certification Exam NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Nutanix Nutanix-NCSC-Level-1 10-3698608908

A customer has an ESXi Cluster with two 10GbE NICs on each node with the following requirements:
o Solution must follow Nutanix Best Practices
o Network configuration should be redundant
o A vSphere Standard Switch must be utilized Which load balancing method should be used?
Select the answer
1 correct answer
A.
Route based on originating port ID
B.
Route based on physical NIC load
C.
Route based on IP hash
D.
Route based on source MAC hash

Quiz

6/10
Certification Exam NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Nutanix Nutanix-NCSC-Level-1 12-552337443

A customer has engaged a Nutanix consultant to deploy a cluster consisting of two NX-3460-G6 blocks. The consultant
arrives at the customer site and fines the following:
o One rack with a total of 5U available
o Two ToR switches with 14 total available ports
o Dual PDUs with six available sockets
What will prevent the consultant from successfully installing the cluster?
Select the answer
1 correct answer
A.
Insufficient sockets for power allocation. Rack space may not be continuous.
B.
Insufficient rack space for block installation. Insufficient sockets for power allocation.
C.
Insufficient network ports for communication. Insufficient sockets for power allocation.
D.
Insufficient network ports for communication. Insufficient sockets for power allocation.
E.
Insufficient network ports for communication. Rack space may not be continuous.

Quiz

7/10
Certification Exam NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Nutanix Nutanix-NCSC-Level-1 14-3698608908

A consultant is preparing to foundation over a customer network that has the following criteria:
 VLAN segmented network
 VLAN tags on the nodes must be imaged prior to starting the foundation process. For each node, the consultant has
done the following:
 Connected to the Network Crash Cart of the Node
 Logged in using “root” credentials What should the consultant do next?
Select the answer
1 correct answer
A.
1. CD to /root/nutanix-network-crashcart/ 2. Start Network Utility tool by running: ./network_configuration 3.Change Values
B.
1. CD to /home/data/nutanix/nutanix-network-crashcart/ 2.Start Network Utility tool by running: ./network_configuration 3. Change Values
C.
1. Log into CVM using [email protected] 2.CD to /root/Nutanix-network-crashcart/ 3.Start Network Utility tool by running: ./network_configuration 4.Change Values
D.
1. Log into CVM using [email protected] 2.CD to /home/data/nutanix/nutanix-network-crashcart/ 3.Start Network Utility tool by running: ./network_configuration 4.Change Values

Quiz

8/10
Certification Exam NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Nutanix Nutanix-NCSC-Level-1 16-552337443

Which Nutanix feature creation is described in the Knowledge Transfer?
Select the answer
1 correct answer
A.
Calm Blueprints
B.
REST API
C.
Self Service Portal
D.
D. Data Protection Domain

Quiz

9/10
Certification Exam NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Nutanix Nutanix-NCSC-Level-1 18-3698608908

A consultant configures a Nutanix cluster and integrates the hosts into vCenter using VMware best practices.
The customer has requested that the Nutanix cluster only have a single datastore.
Upon configuring the cluster per the customer requirements, vCenter displays an alert regarding the heartbeat datastore.
The consultant adds the das.ignoreInsufficientHbDatastore value = true rule. The container can be seen from each host,
but the alert remains active.
What should the consultant do to resolve this issue?
Select the answer
1 correct answer
A.
Turn off and then turn back on HA.
B.
Make sure the DRS setting is turned on.
C.
Create a second container.
D.
D. Whitelist the vCenter IP address within Prism.

Quiz

10/10
Certification Exam NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Nutanix Nutanix-NCSC-Level-1 20-3698608908

Where in the Support Portal is the Best Practices guide for vSphere Networking located?
Select the answer
1 correct answer
A.
Product Notices
B.
Solutions Documentation
C.
Software Documentation
D.
Knowledge Base
Looking for more questions?Buy now

NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Practice test unlocks all online simulator questions

Thank you for choosing the free version of the NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam practice test! Further deepen your knowledge on Nutanix Simulator; by unlocking the full version of our NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Simulator you will be able to take tests with over 88 constantly updated questions and easily pass your exam. 98% of people pass the exam in the first attempt after preparing with our 88 questions.

BUY NOW

What to expect from our NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam practice tests and how to prepare for any exam?

The NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Simulator Practice Tests are part of the Nutanix Database and are the best way to prepare for any NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam exam. The NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam practice tests consist of 88 questions and are written by experts to help you and prepare you to pass the exam on the first attempt. The NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam database includes questions from previous and other exams, which means you will be able to practice simulating past and future questions. Preparation with NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Simulator will also give you an idea of the time it will take to complete each section of the NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam practice test . It is important to note that the NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Simulator does not replace the classic NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam study guides; however, the Simulator provides valuable insights into what to expect and how much work needs to be done to prepare for the NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam exam.

BUY NOW

NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Practice test therefore represents an excellent tool to prepare for the actual exam together with our Nutanix practice test . Our NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Simulator will help you assess your level of preparation and understand your strengths and weaknesses. Below you can read all the quizzes you will find in our NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Simulator and how our unique NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Database made up of real questions:

Info quiz:

  • Quiz name:NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam
  • Total number of questions:88
  • Number of questions for the test:50
  • Pass score:80%

You can prepare for the NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam exams with our mobile app. It is very easy to use and even works offline in case of network failure, with all the functions you need to study and practice with our NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Simulator.

Use our Mobile App, available for both Android and iOS devices, with our NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Simulator . You can use it anywhere and always remember that our mobile app is free and available on all stores.

Our Mobile App contains all NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam practice tests which consist of 88 questions and also provide study material to pass the final NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam exam with guaranteed success. Our NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam database contain hundreds of questions and Nutanix Tests related to NCSC-Level-1: Nutanix Certified Services Consultant (NCSC): Level 1 Exam Exam. This way you can practice anywhere you want, even offline without the internet.

BUY NOW