20:00Min. left

PDF|

Guide for C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7

Quiz C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7

Updated on 2026/09/07

PDF|

Guide for C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7

Updated on 2026/09/07

Randomized | 10 Questions per Test | 20 Minutes | 70% to pass

Learning Mode

Free Test

Question: / 10

20:00Min. left

Question: / 10

4.7

Quiz

Question 1/101/10

You want to use the function "Read PP master data" in the production order.
However, while calling the function you receive an error message.
What could be the reason?

Select the answer:Select the answer

1 correct answer

The material availability check has been performed.

Goods movements have been posted.

The production order has been released.

Order papers have been printed.

Quiz

Question 2/102/10

Which objects can affect the calculation of capacity requirements for an operation? (Choose three)

Select multiple answer: (Choose 3)Select the answer

3 correct answers

Standard values (routing)

In-house production time (material master)

Transport time (routing)

Formulas (work center)

Operation control key (routing)

Quiz

Question 3/103/10

In the Customizing for requirements planning, a project team notices that the alternatives P1, P2, P3
and P4 are also delivered as standard in addition to MRP type PD. The number in each of these
alternatives represents a firming type.
What does a firming type define? (Choose two)

Select multiple answer: (Choose 2)Select the answer

2 correct answers

Handling existing procurement proposals outside the planning time fence.

Handling existing procurement proposals within a planning time fence.

Handling new requirements within the planning time fence.

Handling new procurement proposals that need to be created due to new requirements within the planning time fence.

Quiz

Question 4/104/10

Which of the following scheduling types can only be used in capacity planning?

Select the answer:Select the answer

1 correct answer

Midpoint

Forward

Only capacity requirements

Backward

Quiz

Question 5/105/10

Which types of objects can be changed with Engineering Change Management (ECM)? (Choose
three)

Select multiple answer: (Choose 3)Select the answer

3 correct answers

Task list

Work center

Production version

Bill of material

Material master

Quiz

Question 6/106/10

Which of the following master data can be used with process orders? (Choose three)

Select multiple answer: (Choose 3)Select the answer

3 correct answers

Serial numbers

Master recipes

Resources

Production/resource tools

Production versions

Quiz

Question 7/107/10

You want to use the different options for planning in SAP ECC.
What is the correct sequence of the planning procedures?

Select the answer:Select the answer

1 correct answer

Sales and operations planning -> Demand management -> Long-term planning -> Material requirements planning -> Capacity planning

Demand management -> Sales and operations planning -> Capacity planning -> Long-term planning -> Material requirements planning

Material requirements planning -> Demand management -> Sales and operations planning -> Long-term planning -> Capacity planning

Long-term planning -> Sales and operations planning -> Demand management -> Material requirements planning -> Capacity planning

The correct answer is A.
Correct sequence of planning procedures in SAP ECC:
Sales and operations planning -> Demand management -> Long-term planning -> Material requirements planning -> Capacity planning
In SAP ECC, planning usually follows a logical progression from high-level planning to detailed execution planning:
1. Sales and operations planning
This is the starting point for aggregate planning. It helps determine overall demand and supply at a product-family or high-level planning stage.
2. Demand management
Here, planned independent requirements are created. These requirements represent the demand that will later drive materials planning.
3. Long-term planning
Long-term planning is used to simulate future demand and capacity needs over an extended horizon. It helps evaluate different scenarios before actual execution.
4. Material requirements planning
MRP then calculates detailed material needs based on demand and inventory levels, and creates procurement or production proposals.
5. Capacity planning
Finally, capacity planning checks whether the available resources can meet the detailed requirements generated by MRP.
Why the other options are incorrect:
B. Demand management -> Sales and operations planning -> Capacity planning -> Long-term planning -> Material requirements planning
This is incorrect because sales and operations planning should come before demand management, not after it.
C. Material requirements planning -> Demand management -> Sales and operations planning -> Long-term planning -> Capacity planning
This is incorrect because MRP is a detailed planning step and cannot logically come before the demand that drives it.
D. Long-term planning -> Sales and operations planning -> Demand management -> Material requirements planning -> Capacity planning
This is incorrect because sales and operations planning is normally the first planning level, before demand management and MRP.
In short, the correct planning flow in SAP ECC is from high-level aggregate planning to demand setting, simulation, detailed material planning, and then capacity evaluation.

Right Answer: A

Quiz

Question 8/108/10

Which activity can trigger an automatic availability check for the components of a production order?

Select the answer:Select the answer

1 correct answer

Material staging

Order rescheduling

Order release

Goods receipt for a missing part

Quiz

Question 9/109/10

You want to enhance the system statuses of a production order with user statuses.
How do you do this?

Select the answer:Select the answer

1 correct answer

Define the user statuses in the order type-dependent parameters.

Define a status profile in Customizing and assign it to the production scheduling profile.

Define a status profile in Customizing and assign it to the order type.

Define the user statuses in the Customizing table of the system statuses.

Quiz

Question 10/1010/10

The final assembly of a finished product should only be triggered when a customer order arrives.
Which planning strategy for the finished product do you use?

Select the answer:Select the answer

1 correct answer

Planning with make-to-stock (strategy 10)

Planning at the assembly level (strategy 70)

Planning without final assembly (strategy 50)

Planning with final assembly (strategy 40)

The correct answer is C. Planning without final assembly (strategy 50).
The key part of the question is:
"The final assembly of a finished product should only be triggered when a customer order arrives."
This means the product is not fully assembled in advance. Instead, components or semi-finished goods are planned and possibly produced ahead of time, but the final assembly step waits until there is an actual sales order from the customer.
Why C is correct:
- In planning without final assembly, the system plans the product up to a certain stage.
- Final assembly is postponed until customer demand is known.
- This strategy supports a make-to-order behavior for the last production step while still allowing upstream procurement or production to be planned in advance.
- It is commonly used when you want flexibility in the final product configuration and want to avoid unnecessary finished goods stock.
Why the other options are not correct:
A. Planning with make-to-stock (strategy 10)
- This strategy produces the finished product for stock before customer orders arrive.
- It does not wait for an order to trigger final assembly.
- Therefore, it does not fit the requirement.
B. Planning at the assembly level (strategy 70)
- This strategy plans and produces at the assembly/component level rather than final product stock.
- It is more about planning lower-level assemblies, but the question specifically says final assembly should only happen when the order arrives.
- That is closer to planning without final assembly than to assembly-level planning.
D. Planning with final assembly (strategy 40)
- This strategy usually means final assembly is performed after the customer order is received.
- However, in the context of standard SAP planning strategies, the wording in the question matches the definition of strategy 50, which is specifically "planning without final assembly."
- Strategy 40 is not the best fit for the exact wording given here.
Conclusion:
Since the final assembly should be delayed until a customer order is received, the correct planning strategy is Planning without final assembly (strategy 50).

Right Answer: C

Looking for more questions?Buy now

C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 Practice test unlocks all online simulator questions

Thank you for choosing the free version of the C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 practice test! Further deepen your knowledge on SAP Simulator; by unlocking the full version of our C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 Simulator you will be able to take tests with over 106 constantly updated questions and easily pass your exam. 98% of people pass the exam in the first attempt after preparing with our 106 questions.

BUY NOW

What to expect from our C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 practice tests and how to prepare for any exam?

The C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 Simulator Practice Tests are part of the SAP Database and are the best way to prepare for any C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 exam. The C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 practice tests consist of 106 questions and are written by experts to help you and prepare you to pass the exam on the first attempt. The C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 database includes questions from previous and other exams, which means you will be able to practice simulating past and future questions. Preparation with C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 Simulator will also give you an idea of the time it will take to complete each section of the C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 practice test . It is important to note that the C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 Simulator does not replace the classic C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 study guides; however, the Simulator provides valuable insights into what to expect and how much work needs to be done to prepare for the C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 exam.

BUY NOW

C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 Practice test therefore represents an excellent tool to prepare for the actual exam together with our SAP practice test . Our C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 Simulator will help you assess your level of preparation and understand your strengths and weaknesses. Below you can read all the quizzes you will find in our C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 Simulator and how our unique C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 Database made up of real questions:

Info quiz:

Quiz name:C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7
Total number of questions:106
Number of questions for the test:50
Pass score:80%

You can prepare for the C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 exams with our mobile app. It is very easy to use and even works offline in case of network failure, with all the functions you need to study and practice with our C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 Simulator.

Use our Mobile App, available for both Android and iOS devices, with our C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 Simulator . You can use it anywhere and always remember that our mobile app is free and available on all stores.

Our Mobile App contains all C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 practice tests which consist of 106 questions and also provide study material to pass the final C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 exam with guaranteed success. Our C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 database contain hundreds of questions and SAP Tests related to C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 Exam. This way you can practice anywhere you want, even offline without the internet.

BUY NOW

Quiz C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7

Free Test - Simulator C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7

C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 Practice test unlocks all online simulator questions

What to expect from our C_TSCM42_67: SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 practice tests and how to prepare for any exam?