20:00

Free Test
/ 10

Quiz

1/10
An architect is responsible for designing a VMware Cloud Foundation (VCF)-based private cloud for a
customer. The architect noted the following requirements during a design workshop:
Co-locate application workloads with VCF management component workloads within the same
vSphere cluster.
Shared storage data is always available and 100% current in the event of a single site outage.
Have two sites available no more than 10 miles apart (10ms latency) connected with high-speed
network technology to host their virtual infrastructure.
Protect against outages of a single site designated as an availability zone.
Which two storage technologies could meet the stated requirements? (Choose two.)
Select the answer
2 correct answers
A.
NVMe over TCP
B.
NVMe over Fibre Channel (FC)
C.
VMFS on Fibre Channel (FC)
D.
vSAN
E.
vSphere Virtual Volumes (vVols)

Quiz

2/10
An architect is responsible for designing a new VMware Cloud Foundation (VCF)-based Private Cloud solution. During the requirements gathering workshop with key customer stakeholders, the following information was captured: The solution must support a yearly workload growth of up to 10%. When creating the design document, which design quality should be used to classify the stated requirements?
Select the answer
1 correct answer
A.
Performance
B.
Availability
C.
Manageability
D.
Security

Quiz

3/10
An architect is responsible for designing a new VMware Cloud Foundation (VCF)-based private cloud.
During the discovery workshops, the following information was captured from key customer
stakeholders:
The private cloud will operate with three different monitoring levels:
Self-Managed Service: VM construct only
OS Managed Service: OS metrics and VM construct
Fully Managed Service: Infrastructure apps + OS metrics + VM construct
Approved infrastructure applications include: Microsoft IIS, SQL Server, MySQL, PostgreSQL, Tomcat
Server, and Apache HTTPD
Each workload must subscribe to a monitoring level
Minimal management overhead is required for agent operations
Which two design decision should the architect make to meet the stated monitoring requirements?
(Choose two.)
Select the answer
2 correct answers
A.
Configure the Service Discovery for all workloads that subscribe to the Self-Managed service
B.
Deploy the Managed Telegraf Agent for all workloads that subscribe to the Fully Managed service
C.
Deploy the Managed Telegraf Agent for all workloads that subscribe to the OS Managed service
D.
Deploy the Managed Telegraf Agent for all workloads that subscribe Self-Managed service
E.
Deploy the Open Source Telegraf Agent for all workloads that subscribe to the Fully Managed service

Quiz

4/10
During a design workshop, the security team provides the following requirement for the VMware
Cloud Foundation (VCF) Automation deployment:
All Virtual Machine images must be reviewed and vetted by the security team prior to consumption.
Which Content Library type supports the requirement?
Select the answer
1 correct answer
A.
Subscribed Content Library
B.
Tenant-managed Content Library
C.
Local Content Library
D.
Provider-managed Content Library

Quiz

5/10
A VMware Cloud Foundation (VCF) architect is planning for the expansion of an existing VCF instance.
The existing VCF instance is deployed with a single workload domain. The number of ESXi hosts has
grown to the maximum number the existing vCenter can support.
Which design decision would the architect need to make to allow the existing VCF Instance to add
more ESXi hosts?
Select the answer
1 correct answer
A.
Deploy a second vCenter server appliance within the existing workload domain
B.
Deploy a second workload domain within the existing VCF Instance
C.
Deploy a second cluster within the existing vCenter
D.
Deploy a second VCF Instance within the existing VCF Fleet

Quiz

6/10
An architect is designing a VMware Cloud Foundation (VCF) fleet. The following information has been
provided by the customer:
Due to budget constraints, the solution must utilize the existing server hardware.
The existing server hardware consists of server models from the same vendor but different
generations.
There are ten servers available for use in this solution.
Management and Business workloads should be hosted in different clusters.
What design decision should the architect make for the lifecycle management of the solution based
on this information?
Select the answer
1 correct answer
A.
Use a single vSphere Lifecycle Manager composite image for the management domain cluster.
B.
Use separate vSphere Lifecycle Manager composite images for the management and workload domain clusters.
C.
Use vSphere Lifecycle Manager baselines for the management domain cluster.
D.
Use a single vSphere Lifecycle Manager composite image for the management and workload domain clusters.

Quiz

7/10
An architect is designing a private cloud infrastructure for two departments (HR and Finance) based
on VMware Cloud Foundation (VCF) and has been given the following requirements:
HR and Finance superusers require access to VCF Operations.
VCF Operations access, monitoring, and logging information must not be shared across departments.
Which design decision would meet the requirement?
Select the answer
1 correct answer
A.
Deploy two VCF Fleet instances within the private cloud, one for HR and one for Finance.
B.
Configure two tenant instances within VCF Operations, one for HR and one for Finance.
C.
Deploy two VCF Operations instances within a VCF Fleet, one for HR and one for Finance.
D.
Configure two sets of scopes and index partitions within VCF Operations, one for HR and one for Finance.

Quiz

8/10
An architect is designing a Business Continuity Disaster Recovery (BCDR) strategy for a Virtual Cloud
Foundation (VCF) environment with a management domain and multiple workload domains
deployed in two datacenters located in the same city.
During one of the initial workshops with stakeholders, the following information was identified:
The Recovery Time Objective (RTO) for workloads is 24 hours.
The management domain must remain continuously available with Recovery Point Objective (RPO)
of 0.
Hardware overhead should be minimized by utilizing standby resources that host test workloads
during normal operation.
Operational overhead should be minimized.
Latency between both datacenters is 2 ms.
Which design decision should the architect document to satisfy provided requirements?
Select the answer
1 correct answer
A.
Use VCF Automation to redeploy the entire environment in case of a failure.
B.
Implement vSAN stretched cluster for the management domain and Live Recovery for the workload domains.
C.
Back up all workloads daily and store them in a central repository to meet RTO expectations.
D.
Use asynchronous replication for both management and workload domains.

Quiz

9/10
A customer is deploying VMware Cloud Foundation (VCF) in an enterprise environment. During a
series of workshops with stakeholders, the following requirements were identified:
The network solution must be capable of complete logical isolation.
The network solution must be capable of supporting independent upgrade cycles for network stacks.
The network solution must be capable of tenant-specific customization of NSX configurations.
The architect has made the following design decisions:
The solution will consist of a single VCF instance.
The solution will include a management domain and two workload domains.
Based on the scenario, which additional design decision meets all of the stated requirements?
Select the answer
1 correct answer
A.
Deploy NSX only in the management domain and use VLAN-backed segments in the workload domains.
B.
Use a global NSX Federation configuration across workload domains.
C.
Use a shared NSX instance across both workload domains.
D.
Deploy a dedicated NSX instance per workload domain.

Quiz

10/10
An architect was in an architectural workshop and noted the following business objectives:
The solution must prioritize optimal end-to-end user shopping experience for customers accessing
the website.
The website must be available 24 x 7 x 365.
Which three conceptual model items relate to these business objectives? (Choose three.)
Select the answer
3 correct answers
A.
A requirement to have 99.99% availability uptime measured at the front-end application layer
B.
A risk that the external internet network provider does not meet the service level agreement (SLA) requirements
C.
A requirement to have 99.99% availability uptime measured at the network infrastructure layer
D.
An assumption that site performance is not a key performance indicator (KPI) for the customer
E.
A constraint of any planned changes limited to outside of business hours only
F.
An assumption that there is sufficient budget for the design to meet the performance requirements
Looking for more questions?Buy now

VMware Cloud Foundation 9.0 Architect Practice test unlocks all online simulator questions

Thank you for choosing the free version of the VMware Cloud Foundation 9.0 Architect practice test! Further deepen your knowledge on VMware Simulator; by unlocking the full version of our VMware Cloud Foundation 9.0 Architect Simulator you will be able to take tests with over 60 constantly updated questions and easily pass your exam. 98% of people pass the exam in the first attempt after preparing with our 60 questions.

BUY NOW

What to expect from our VMware Cloud Foundation 9.0 Architect practice tests and how to prepare for any exam?

The VMware Cloud Foundation 9.0 Architect Simulator Practice Tests are part of the VMware Database and are the best way to prepare for any VMware Cloud Foundation 9.0 Architect exam. The VMware Cloud Foundation 9.0 Architect practice tests consist of 60 questions and are written by experts to help you and prepare you to pass the exam on the first attempt. The VMware Cloud Foundation 9.0 Architect database includes questions from previous and other exams, which means you will be able to practice simulating past and future questions. Preparation with VMware Cloud Foundation 9.0 Architect Simulator will also give you an idea of the time it will take to complete each section of the VMware Cloud Foundation 9.0 Architect practice test . It is important to note that the VMware Cloud Foundation 9.0 Architect Simulator does not replace the classic VMware Cloud Foundation 9.0 Architect study guides; however, the Simulator provides valuable insights into what to expect and how much work needs to be done to prepare for the VMware Cloud Foundation 9.0 Architect exam.

BUY NOW

VMware Cloud Foundation 9.0 Architect Practice test therefore represents an excellent tool to prepare for the actual exam together with our VMware practice test . Our VMware Cloud Foundation 9.0 Architect Simulator will help you assess your level of preparation and understand your strengths and weaknesses. Below you can read all the quizzes you will find in our VMware Cloud Foundation 9.0 Architect Simulator and how our unique VMware Cloud Foundation 9.0 Architect Database made up of real questions:

Info quiz:

  • Quiz name:VMware Cloud Foundation 9.0 Architect
  • Total number of questions:60
  • Number of questions for the test:50
  • Pass score:80%

You can prepare for the VMware Cloud Foundation 9.0 Architect exams with our mobile app. It is very easy to use and even works offline in case of network failure, with all the functions you need to study and practice with our VMware Cloud Foundation 9.0 Architect Simulator.

Use our Mobile App, available for both Android and iOS devices, with our VMware Cloud Foundation 9.0 Architect Simulator . You can use it anywhere and always remember that our mobile app is free and available on all stores.

Our Mobile App contains all VMware Cloud Foundation 9.0 Architect practice tests which consist of 60 questions and also provide study material to pass the final VMware Cloud Foundation 9.0 Architect exam with guaranteed success. Our VMware Cloud Foundation 9.0 Architect database contain hundreds of questions and VMware Tests related to VMware Cloud Foundation 9.0 Architect Exam. This way you can practice anywhere you want, even offline without the internet.

BUY NOW