The new flashcard feature is useful to memorize questions.
?Change your study mode
At any time, you can change the study mode, and alternate between the practice mode and the exam mode. In practice mode, you can configure for example the number of questions or tests, and other parameters to help you study.
Randomized | 10 Questions per Test | 20 Minutes | 70% to pass|
To re-configure your study mode again and change - for example - the number of tests, whether you have random questions and all other configuration parameters.
?Simulator Configuration
Auto-scroll: You can use the automatic scrolling of the questionnaire that occurs as soon as you answer one or all of the answers to a question correctly. Auto scrolling is activated if you answer a single answer, or as soon as you answer all the mandatory answers. Learning Mode: During learning mode you can get a real time result for your answer.
Free Test
Question: / 10
20:00Min. left
?Restart the current test
To restart the current test by clearing all your answers and the time used up to now. Warning: all answers will be lost.
Question: / 10
4.7(221 Votes)
Quiz
Question 1/101/10
A technician needs to provide remote support for a legacy Linux-based operating system from their Windows laptop. The solution needs to allow the technician to see what the user is doing and provide the ability to interact with the user's session. Which of the following remote access technologies would support the use case?
Select the answer:Select the answer
1 correct answer
A.
Sol: VPN
B.
Sol: VNC
C.
Sol: SSH
D.
Sol: RDP
The correct answer isVNC (Virtual Network Computing). VNC is a graphical desktop-sharing system that uses the Remote Frame Buffer protocol (RFB) to remotely control another computer. It is platform-independent and widely supported on Linux, which makes it ideal for providinginteractive remote support for a Linux-based operating system. It allows the technician not only to view the remote desktop session but also tocontrol it, fulfilling the need to see and interact with the user’s session. A . VPN(Virtual Private Network) creates a secure tunnel to a network but doesnot provide desktop sharing or session controlby itself. C . SSH(Secure Shell) provides secure command-line access to Unix/Linux systems but does not offergraphical desktop interaction, which is a requirement in this case. D . RDP(Remote Desktop Protocol) is primarily a Microsoft protocol, and although it can be made to work on Linux, it isnot natively supported on legacy Linux systems, and thusless suitablethan VNC in this scenario. CompTIA A+ 220-1102 Core 2 Objective Reference: Objective 1.8 – Given a scenario, use features and tools of the operating system. Under this objective, candidates are expected to be familiar with remote access technologies, includingRDP, SSH, and VNC, and understand their appropriate uses and limitations on different platforms such as Windows and Linux.
Right Answer: B
Quiz
Question 2/102/10
A technician is attempting to join a workstation to a domain but is receiving an error message stating the domain cannot be found. However, the technician is able to ping the server and access the internet. Given the following information: IP Address – 192.168.1.210 Subnet Mask – 255.255.255.0 Gateway – 192.168.1.1 DNS1 – 8.8.8.8 DNS2 – 1.1.1.1 Server – 192.168.1.10 Which of the following should the technician do to fix the issue?
Select the answer:Select the answer
1 correct answer
A.
Sol: Change the DNS settings.
B.
Sol: Assign a static IP address.
C.
Sol: Configure a subnet mask.
D.
Sol: Update the default gateway.
The issue described—“domain cannot be found” despite the ability to ping the server and access the internet—indicates aDNS resolution problem, not a network connectivity issue. The workstation is currently usingpublic DNS servers (8.8.8.8 and 1.1.1.1)whichcannot resolve internal domain names, such as the ones used in Active Directory environments. To resolve this, the technician needs tochange the DNS settings to point to the internal DNS server, which in most domain setups is thedomain controller itself (likely 192.168.1.10 in this case). Here’s the breakdown of the incorrect options: B . Assign a static IP address: The IP is already assigned and functioning; the device can ping and reach the network and internet. C . Configure a subnet mask: The subnet mask is appropriate for the network range (Class C /24). D . Update the default gateway: The gateway is valid and allows internet access; this is not the issue. CompTIA A+ 220-1102 Core 2 Objective Reference: Objective 1.8 – Given a scenario, use features and tools of the operating system. Under this objective, candidates must know how to troubleshoot OS-based network configurations, includingproper DNS settings in domain environments. —
Right Answer: A
Quiz
Question 3/103/10
A network technician notices that most of the company's network switches are now end-of-life and need to be upgraded. Which of the following should the technician do first?
Select the answer:Select the answer
1 correct answer
A.
Sol: Implement the change
B.
Sol: Approve the change
C.
Sol: Propose the change
D.
Sol: Schedule the change
The first step in the IT change management process is to identify and propose the change. In this case, the technician notices a need (end-of-life network switches), so the appropriate action is to formally propose a change. This proposal would be documented and submitted for approval before any planning or implementation occurs. According to the CompTIA A+ 220-1102 objectives under Operational Procedures (Domain 4.0), the change management process follows these typical steps: Submit a change request (Propose the change) Review and approval (Approve the change) Planning and scheduling (Schedule the change) Implementation Documentation and review Therefore, proposing the change is the correct first step in accordance with standard ITIL-based change management practices. Reference: CompTIA A+ 220-1102 Objective 4.1: Given a scenario, implement best practices associated with documentation and support systems information management. Study Guide Section: Change Management Process ===========================
Right Answer: C
Quiz
Question 4/104/10
MFA for a custom web application on a user's smartphone is no longer working. The last time the user remembered it working was before taking a vacation to another country. Which of the following should the technician do first?
Select the answer:Select the answer
1 correct answer
A.
Sol: Verify the date and time settings
B.
Sol: Apply mobile OS patches
C.
Sol: Uninstall and reinstall the application
D.
Sol: Escalate to the website developer
Multi-Factor Authentication (MFA) apps, especially time-based one-time password (TOTP) apps (e.g., Google Authenticator, Authy), rely on accurate time synchronization between the device and the authentication server. If the user recently traveled internationally, the device may have incorrect date/time settings due to time zone changes or failed synchronization, leading to MFA failure. The most logical and non-intrusive first step is to verify and correct the date and time settings. This aligns with basic troubleshooting principles—start with the simplest and most likely cause before taking more drastic action. Reference: CompTIA A+ 220-1102 Objective 2.6: Given a scenario, apply cybersecurity best practices to secure a workstation. Study Guide Section: Authentication technologies and MFA troubleshooting ===========================
Right Answer: A
Quiz
Question 5/105/10
Which of the following is found in an MSDS sheet for a battery backup?
Select the answer:Select the answer
1 correct answer
A.
Sol: Installation instructions
B.
Sol: Emergency procedures
C.
Sol: Configuration steps
D.
Sol: Voltage specifications
An MSDS (Material Safety Data Sheet), now commonly referred to as SDS (Safety Data Sheet), is a document that provides detailed information on the properties of a particular substance. It includes safety guidelines and emergency procedures related to handling, exposure, fire hazards, and first aid—not installation or configuration instructions. For a battery backup (UPS device), the MSDS would include emergency procedures such as what to do in case of a chemical spill, exposure to battery acid, or fire hazard due to overheating or chemical leakage. This ensures the safety of personnel and complies with hazardous materials handling regulations. Reference: CompTIA A+ 220-1102 Objective 4.1: Given a scenario, implement best practices associated with documentation and support systems information management. Study Guide Section: MSDS/SDS usage and safety documentation
Right Answer: B
Quiz
Question 6/106/10
The screen of a previously working computer repeatedly displays an OS Not Found error message when the computer is started. Only a USB drive, a keyboard, and a mouse are plugged into the computer. Which of the following should a technician do first?
Select the answer:Select the answer
1 correct answer
A.
Sol: Run data recovery tools on the disk
B.
Sol: Partition the disk using the GPT format
C.
Sol: Check boot options
D.
Sol: Switch from UEFI to BIOS
An "OS Not Found" error typically indicates that the computer is attempting to boot from a drive that doesn't contain a valid operating system or bootable partition. The presence of a USB drive might be confusing the boot order. Therefore, the first step a technician should take is to verify and adjust the boot sequence in the system’s firmware (BIOS or UEFI). It's possible that the USB drive is being prioritized over the internal hard drive, which may cause the system to miss the OS entirely. A . Running data recovery tools is premature before confirming boot order. B . Repartitioning the disk would destroy existing data—this should not be done until confirmed the OS is actually missing. D . Switching between UEFI and BIOS (legacy mode) might help in rare cases, but it is not the first step in standard OS boot issue troubleshooting. Reference: CompTIA A+ 220-1102 Objective 1.7: Troubleshoot common operating system problems. Study Guide Section: Boot process and boot order configuration. ===========================
Right Answer: C
Quiz
Question 7/107/10
A security administrator teaches all of an organization's staff members to use BitLocker To Go. Which of the following best describes the reason for this training?
Select the answer:Select the answer
1 correct answer
A.
Sol: To ensure that all removable media is password protected in case of loss or theft
B.
Sol: To enable Secure Boot and a BIOS-level password to prevent configuration changes
C.
Sol: To enforce VPN connectivity to be encrypted by hardware modules
D.
Sol: To configure all laptops to use the TPM as an encryption factor for hard drives
BitLocker To Go is a Microsoft encryption feature specifically designed for removable drives such as USB flash drives and external hard drives. It allows users to protect the data on these devices by requiring a password to decrypt the contents, thereby preventing unauthorized access in the event the device is lost or stolen. A is correct because BitLocker To Go is directly tied to password-protecting removable media. B and C are unrelated to BitLocker To Go; Secure Boot and VPN encryption are entirely different security layers. D applies to BitLocker (not BitLocker To Go) and full disk encryption on internal drives using TPM. Reference: CompTIA A+ 220-1102 Objective 2.2: Compare and contrast common security measures and tools. Study Guide Section: Encryption technologies (BitLocker, BitLocker To Go) ===========================
Right Answer: A
Quiz
Question 8/108/10
Which of the following is used to detect and record access to restricted areas?
Select the answer:Select the answer
1 correct answer
A.
Sol: Bollards
B.
Sol: Video surveillance
C.
Sol: Badge readers
D.
Sol: Fence
Badge readers are electronic access control systems that require authorized users to scan a badge (e.g., RFID or magnetic strip cards) to gain access to restricted physical locations. These systems typically log all access attempts—successful or denied—providing both detection and recording of access events. A . Bollards are physical barriers to prevent vehicle access. B . Video surveillance can record access visually but does not track identity unless integrated with access control systems. D . A fence restricts access but doesn't detect or record who entered. Reference: CompTIA A+ 220-1102 Objective 2.4: Compare and contrast physical security measures. Study Guide Section: Physical access controls (e.g., badge readers, mantraps)
Right Answer: C
Quiz
Question 9/109/10
An administrator received an email stating that the OS they are currently supporting will no longer be issued security updates and patches. Which of the following is most likely the reason the administrator received this message?
Select the answer:Select the answer
1 correct answer
A.
Sol: Support from the computer's manufacturer is expiring
B.
Sol: The OS will be considered end of life
C.
Sol: The built-in security software is being removed from the next OS version
D.
Sol: A new version of the OS will be released soon
Operating systems periodically reach a status known as "end of life" (EOL), at which point the developer (e.g., Microsoft, Apple) ceases to provide security updates, patches, or technical support. When this happens, the OS becomes vulnerable and non-compliant with security best practices, which is why organizations typically receive advance notifications from vendors or support teams. A . Manufacturer support expiration only applies to hardware, not OS patching. C . Security software may be upgraded or removed, but that does not affect patching the OS itself. D . The release of a new version doesn’t automatically stop updates for the current version. Reference: CompTIA A+ 220-1102 Objective 1.3: Given a scenario, use appropriate Microsoft operating system features and tools. Study Guide Section: OS lifecycle management and vendor support phases (e.g., EOL) ===========================
Right Answer: B
Quiz
Question 10/1010/10
Which of the following is the best way to distribute custom images to 800 devices that include four device vendor classes with two types of user groups?
Select the answer:Select the answer
1 correct answer
A.
Sol: Use xcopy to clone the hard drives from one to another
B.
Sol: Use robocopy to move the files to each device
C.
Sol: Use a local image deployment tool for each device
D.
Sol: Use a network-based remote installation tool
In enterprise environments, network-based deployment solutions (such as Windows Deployment Services or SCCM) allow administrators to push images across the network to hundreds of devices efficiently. These tools support hardware-specific drivers (for different vendor classes) and can accommodate user-group configurations using task sequences or answer files. A and B (xcopy and robocopy) are file-level tools and not designed for full OS image deployment. C . Using local tools per device is inefficient for large-scale rollouts (800 devices). D . Network-based deployment is the industry standard for this scale. Reference: CompTIA A+ 220-1102 Objective 1.4: Given a scenario, use appropriate Microsoft operating system installation methods. Study Guide Section: Deployment methods (including PXE boot, image deployment) ===========================
220-1202: CompTIA A+ Certification Exam: Core 2 Practice test unlocks all online simulator questions
Thank you for choosing the free version of the 220-1202: CompTIA A+ Certification Exam: Core 2 practice test! Further deepen your knowledge on CompTIA Simulator; by unlocking the full version of our 220-1202: CompTIA A+ Certification Exam: Core 2 Simulator you will be able to take tests with over 248 constantly updated questions and easily pass your exam. 98% of people pass the exam in the first attempt after preparing with our 248 questions.
What to expect from our 220-1202: CompTIA A+ Certification Exam: Core 2 practice tests and how to prepare for any exam?
The 220-1202: CompTIA A+ Certification Exam: Core 2 Simulator Practice Tests are part of the CompTIA Database and are the best way to prepare for any 220-1202: CompTIA A+ Certification Exam: Core 2 exam. The 220-1202: CompTIA A+ Certification Exam: Core 2 practice tests consist of 248 questions and are written by experts to help you and prepare you to pass the exam on the first attempt. The 220-1202: CompTIA A+ Certification Exam: Core 2 database includes questions from previous and other exams, which means you will be able to practice simulating past and future questions. Preparation with 220-1202: CompTIA A+ Certification Exam: Core 2 Simulator will also give you an idea of the time it will take to complete each section of the 220-1202: CompTIA A+ Certification Exam: Core 2 practice test . It is important to note that the 220-1202: CompTIA A+ Certification Exam: Core 2 Simulator does not replace the classic 220-1202: CompTIA A+ Certification Exam: Core 2 study guides; however, the Simulator provides valuable insights into what to expect and how much work needs to be done to prepare for the 220-1202: CompTIA A+ Certification Exam: Core 2 exam.
220-1202: CompTIA A+ Certification Exam: Core 2 Practice test therefore represents an excellent tool to prepare for the actual exam together with our CompTIA practice test . Our 220-1202: CompTIA A+ Certification Exam: Core 2 Simulator will help you assess your level of preparation and understand your strengths and weaknesses. Below you can read all the quizzes you will find in our 220-1202: CompTIA A+ Certification Exam: Core 2 Simulator and how our unique 220-1202: CompTIA A+ Certification Exam: Core 2 Database made up of real questions:
You can prepare for the 220-1202: CompTIA A+ Certification Exam: Core 2 exams with our mobile app. It is very easy to use and even works offline in case of network failure, with all the functions you need to study and practice with our 220-1202: CompTIA A+ Certification Exam: Core 2 Simulator.
Use our Mobile App, available for both Android and iOS devices, with our 220-1202: CompTIA A+ Certification Exam: Core 2 Simulator . You can use it anywhere and always remember that our mobile app is free and available on all stores.
Our Mobile App contains all 220-1202: CompTIA A+ Certification Exam: Core 2 practice tests which consist of 248 questions and also provide study material to pass the final 220-1202: CompTIA A+ Certification Exam: Core 2 exam with guaranteed success.
Our 220-1202: CompTIA A+ Certification Exam: Core 2 database contain hundreds of questions and CompTIA Tests related to 220-1202: CompTIA A+ Certification Exam: Core 2 Exam. This way you can practice anywhere you want, even offline without the internet.