20:00

PDF|

Guide for CWAP-405: Certified Wireless Analysis Professional

Quiz CWAP-405: Certified Wireless Analysis Professional

Free Test
/ 10

Quiz

1/10
Protocol Analysis
An analyst must capture beacons, probe responses, authentication frames, and ACKs from several BSSs on channel 36 without associating to any of them. Which adapter operating mode is required?
Select the answer
1 correct answer
A.
Promiscuous mode while associated to one of the BSSs
B.
Station (managed) mode with background scanning enabled
C.
Monitor (RFMON) mode tuned to channel 36
D.
Ad hoc (IBSS) mode on channel 36

Quiz

2/10
Spectrum Analysis
An analyst using a swept-tuned spectrum analyzer reduces the resolution bandwidth (RBW) from 300 kHz to 30 kHz while keeping the same frequency span. Which result should the analyst expect?
Select the answer
1 correct answer
A.
A higher displayed noise floor and a faster sweep
B.
A lower displayed noise floor and a slower sweep
C.
A higher displayed noise floor and better frequency resolution
D.
No change to the noise floor but a faster sweep

Quiz

3/10
PHY Layers and Technologies
An analyst reviewing a 2.4 GHz capture sees a frame whose Radiotap Rate field reports 2 Mbps. Which modulation and spreading technique was used to transmit the PSDU of this frame?
Select the answer
1 correct answer
A.
DBPSK with the 11-chip Barker code
B.
Complementary Code Keying (CCK) with 8-chip codewords
C.
DQPSK with the 11-chip Barker code
D.
BPSK-modulated OFDM with rate 1/2 coding

Quiz

4/10
MAC Sublayer and Functions
An analyst decodes the first two bits (B0-B1) of the Frame Control field of a beacon transmitted by an 802.11ax AP operating in the 5 GHz band. What value should be present in this subfield?
Select the answer
1 correct answer
A.
1, because HE PPDUs require the newer MAC header format
B.
0, because PV0 frames are used by all non-S1G 802.11 PHYs
C.
2, indicating a beacon generated by a High Throughput or later STA
D.
3, indicating an extension frame type used for HE and EHT management

Quiz

5/10
WLAN Medium Access
An analyst is measuring idle gaps between frames on a 5 GHz channel used only by non-QoS OFDM stations. What is the DCF Interframe Space (DIFS) a station must observe before starting its backoff on this channel?
Select the answer
1 correct answer
A.
28 microseconds
B.
34 microseconds
C.
43 microseconds
D.
50 microseconds

Quiz

6/10
802.11 Frame Exchanges
An analyst decodes a beacon frame and sees the Beacon Interval field set to 100. Measuring the time between successive Target Beacon Transmission Times (TBTTs), what interval should the analyst expect?
Select the answer
1 correct answer
A.
100 ms
B.
102.4 ms
C.
1024 ms
D.
10.24 ms

Quiz

7/10
Protocol Analysis
A technician starts Wireshark on a Windows laptop, selects the Wi-Fi interface, and leaves the default settings in place. The resulting capture contains only frames to and from the laptop and a few broadcasts, all displayed with Ethernet II headers and no 802.11 MAC header or radio information. What is the most likely explanation?
Select the answer
1 correct answer
A.
The capture filter removed all 802.11 management frames
B.
The adapter was capturing in promiscuous or normal mode rather than monitor mode
C.
The laptop was associated to a WPA3 network, which hides the 802.11 header
D.
The snapshot length was set too small to contain the 802.11 header

Quiz

8/10
Spectrum Analysis
A traditional swept spectrum analyzer repeatedly fails to show intermittent radar pulses that a real-time FFT-based analyzer captures easily on the same 5 GHz channel. What is the most likely explanation?
Select the answer
1 correct answer
A.
The swept analyzer has a lower noise floor that filters out the pulses
B.
Radar pulses are only visible when the analyzer decodes the 802.11 preamble
C.
FFT analyzers use a wider antenna aperture that improves receive gain
D.
The swept analyzer is tuned to only a small part of the span at any instant and misses short transient events

Quiz

9/10
PHY Layers and Technologies
A legacy barcode scanner on a 2.4 GHz network is observed transmitting data frames at 11 Mbps. Which modulation technique does the HR-DSSS PHY use to achieve this rate?
Select the answer
1 correct answer
A.
Complementary Code Keying (CCK) with 8-chip codewords at 1.375 Msymbols/s
B.
DQPSK with the 11-chip Barker code at 1 Msymbol/s
C.
16-QAM OFDM with rate 3/4 coding
D.
Mandatory Packet Binary Convolutional Coding (PBCC) with 64-state encoding

Quiz

10/10
MAC Sublayer and Functions
A protocol analyzer shows a 20-octet frame whose Frame Control field indicates Type = 1 (binary 01) and Subtype = 11 (binary 1011). Which frame is this?
Select the answer
1 correct answer
A.
Clear to Send (CTS)
B.
PS-Poll
C.
Block Ack Request
D.
Request to Send (RTS)
Looking for more questions?Buy now

CWAP-405: Certified Wireless Analysis Professional Practice test unlocks all online simulator questions

Thank you for choosing the free version of the CWAP-405: Certified Wireless Analysis Professional practice test! Further deepen your knowledge on CWNP Simulator; by unlocking the full version of our CWAP-405: Certified Wireless Analysis Professional Simulator you will be able to take tests with over 465 constantly updated questions and easily pass your exam. 98% of people pass the exam in the first attempt after preparing with our 465 questions.

BUY NOW

What to expect from our CWAP-405: Certified Wireless Analysis Professional practice tests and how to prepare for any exam?

The CWAP-405: Certified Wireless Analysis Professional Simulator Practice Tests are part of the CWNP Database and are the best way to prepare for any CWAP-405: Certified Wireless Analysis Professional exam. The CWAP-405: Certified Wireless Analysis Professional practice tests consist of 465 questions and are written by experts to help you and prepare you to pass the exam on the first attempt. The CWAP-405: Certified Wireless Analysis Professional database includes questions from previous and other exams, which means you will be able to practice simulating past and future questions. Preparation with CWAP-405: Certified Wireless Analysis Professional Simulator will also give you an idea of the time it will take to complete each section of the CWAP-405: Certified Wireless Analysis Professional practice test . It is important to note that the CWAP-405: Certified Wireless Analysis Professional Simulator does not replace the classic CWAP-405: Certified Wireless Analysis Professional study guides; however, the Simulator provides valuable insights into what to expect and how much work needs to be done to prepare for the CWAP-405: Certified Wireless Analysis Professional exam.

BUY NOW

CWAP-405: Certified Wireless Analysis Professional Practice test therefore represents an excellent tool to prepare for the actual exam together with our CWNP practice test . Our CWAP-405: Certified Wireless Analysis Professional Simulator will help you assess your level of preparation and understand your strengths and weaknesses. Below you can read all the quizzes you will find in our CWAP-405: Certified Wireless Analysis Professional Simulator and how our unique CWAP-405: Certified Wireless Analysis Professional Database made up of real questions:

Info quiz:

  • Quiz name:CWAP-405: Certified Wireless Analysis Professional
  • Total number of questions:465
  • Number of questions for the test:50
  • Pass score:80%

You can prepare for the CWAP-405: Certified Wireless Analysis Professional exams with our mobile app. It is very easy to use and even works offline in case of network failure, with all the functions you need to study and practice with our CWAP-405: Certified Wireless Analysis Professional Simulator.

Use our Mobile App, available for both Android and iOS devices, with our CWAP-405: Certified Wireless Analysis Professional Simulator . You can use it anywhere and always remember that our mobile app is free and available on all stores.

Our Mobile App contains all CWAP-405: Certified Wireless Analysis Professional practice tests which consist of 465 questions and also provide study material to pass the final CWAP-405: Certified Wireless Analysis Professional exam with guaranteed success. Our CWAP-405: Certified Wireless Analysis Professional database contain hundreds of questions and CWNP Tests related to CWAP-405: Certified Wireless Analysis Professional Exam. This way you can practice anywhere you want, even offline without the internet.

BUY NOW