20:00

PDF|

Guide for NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2

Quiz NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2

Free Test
/ 10

Quiz

1/10
Refer to the diagnostic output:


Certification Exam NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Fortinet Fortinet-NSE6_FSW-7.2 2-2645146738



Two entries in the exhibit show that the same MAC address has been used in two different VLANs.
Which MAC address is shown in the above output?
Select the answer
1 correct answer
A.
It is a MAC address of FortiLink interface on FortiGate.
B.
It is a MAC address of a switch that accepts multiple VLANs.
C.
It is a MAC address of an upstream FortiSwitch.
D.
It is a MAC address of FortiGate in HA configuration.

Quiz

2/10
Refer to the exhibit.




Certification Exam NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Fortinet Fortinet-NSE6_FSW-7.2 3-3349690668



Core-1 and Access-1 are managed and authorized by FortiGate-1. which uses port4 as the FortiLink
interface. After FortiGate authorizes and manages Core-2. Port1 status becomes STP discarding.
Why is port1 in the discarding state?
Select the answer
1 correct answer
A.
port1 on Core-2 is discarding only management traffic.
B.
Core-1 and Core-2 do not have MCLAG configuration.
C.
Access-1 is the root bridge and can only have one root port.
D.
Core-2 has the lowest bridge priority.

Quiz

3/10
Which two statements about the FortiLink authorization process are true? (Choose two.)
Select the answer
2 correct answers
A.
The administrator must manually pre-authorize FortiGate on FortiSwitch by adding the FortiGate
serial number.
B.
FortiSwitch requires a reboot to complete the authorization process.
C.
A FortiLink frame is sent by FortiGate to FortiSwitch to complete the authorization.
D.
FortiLink authorization sets the FortiSwitch management mode to FortiLink.

Quiz

4/10
Refer to the exhibits


Certification Exam NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Fortinet Fortinet-NSE6_FSW-7.2 4-203403775







Certification Exam NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Fortinet Fortinet-NSE6_FSW-7.2 5-644919991



Traffic arriving on port2 on FortiSwitch is tagged with VLAN ID 10 and destined for PC1 connected on
port1. PC1 expects to receive traffic untagged from port1 on FortiSwitch.
Which two configurations can you perform on FortiSwitch to ensure PC1 receives untagged traffic on
port1? (Choose two.)
Select the answer
2 correct answers
A.
Add the MAC address of PCI as a member of VLAN 10.
B.
Add VLAN ID 10 as a member of the untagged VLANs on port1.
C.
Remove VLAN 10 from the allowed VLANs and add it to untagged VLANs on port1.
D.
Enable Private VLAN on VLAN 10 and add VLAN 20 as an isolated VLAN.

Quiz

5/10
Refer to the exhibits.




Certification Exam NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Fortinet Fortinet-NSE6_FSW-7.2 6-3187360956



Certification Exam NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Fortinet Fortinet-NSE6_FSW-7.2 7-1101882883



Port1 and port2 are the only ports configured with the same native VLAN 10.
What are two reasons that can trigger port1 to shut down? (Choose two.)
Select the answer
2 correct answers
A.
port1 was shut down by loop guard protection.
B.
STP triggered a loop and applied loop guard protection on port1.
C.
An endpoint sent a BPDU on port1 that it received from another interface.
D.
Loop guard frame sourced from port 1 was received on port 1.

Quiz

6/10
Refer to the diagnostic output:




Certification Exam NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Fortinet Fortinet-NSE6_FSW-7.2 8-4018146334



What makes the use of the sniffer command on the FortiSwitch CLI unreliable on port 23?
Select the answer
1 correct answer
A.
The types of packets captured is limited.
B.
Just the port egress payloads are printed on CLI.
C.
Only untagged VLAN traffic can be captured.
D.
The switch port might be used as a trunk member

Quiz

7/10
Which interfaces on FortiSwitch send out FortiLink discovery frames by default in order to detect a
FortiGate with an enabled FortiLink interface?
Select the answer
1 correct answer
A.
All ports have auto-discovery enabled by default.
B.
No ports are enabled by default for auto-discovery. This must be configured under config switch
interface.
C.
The ports with auto-discovery enabled by default are dependent upon the FortiSwitch model.
D.
The last four switch ports on FortiSwitch have auto-discovery enabled by default.

Quiz

8/10
Which LLDP-MED Type-Length-Values does FortiSwitch collect from endpoints to track network
devices and determine their characteristics?
Select the answer
1 correct answer
A.
Network policy
B.
Power management
C.
Location
D.
Inventory management

Quiz

9/10
Refer to the exhibit.




Certification Exam NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Fortinet Fortinet-NSE6_FSW-7.2 9-4119702623



What two conclusions can be made regarding DHCP snooping configuration? (Choose two.)
Select the answer
2 correct answers
A.
Maximum value to accept clients DHCP request is configured as per DHCP server range.
B.
FortiSwitch is configured to trust DHCP replies coming on FortiLink interface.
C.
DHCP clients that are trusted by DHCP snooping configured is only one.
D.
Global configuration for DHCP snooping is set to forward DHCP client requests on all ports in the
VLAN.

Quiz

10/10
What are two reasons why time synchronization between FortiGate and its managed FortiSwitch is
critical in switch management? (Choose two.)
Select the answer
2 correct answers
A.
FortiSwitch does not retain its time after a reboot, which gets reset after each reboot.
B.
FortiSwitch will not be able to become an NTP server for downstream devices.
C.
FortiSwitch cannot complete the DTLS handshake used in the CAPWAP tunnel.
D.
FortiSwitch will not allow other FortiSwitch devices in the chain be discovered by FortiGate.
Looking for more questions?Buy now

NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Practice test unlocks all online simulator questions

Thank you for choosing the free version of the NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 practice test! Further deepen your knowledge on Fortinet Simulator; by unlocking the full version of our NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Simulator you will be able to take tests with over 56 constantly updated questions and easily pass your exam. 98% of people pass the exam in the first attempt after preparing with our 56 questions.

BUY NOW

What to expect from our NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 practice tests and how to prepare for any exam?

The NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Simulator Practice Tests are part of the Fortinet Database and are the best way to prepare for any NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 exam. The NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 practice tests consist of 56 questions and are written by experts to help you and prepare you to pass the exam on the first attempt. The NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 database includes questions from previous and other exams, which means you will be able to practice simulating past and future questions. Preparation with NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Simulator will also give you an idea of the time it will take to complete each section of the NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 practice test . It is important to note that the NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Simulator does not replace the classic NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 study guides; however, the Simulator provides valuable insights into what to expect and how much work needs to be done to prepare for the NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 exam.

BUY NOW

NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Practice test therefore represents an excellent tool to prepare for the actual exam together with our Fortinet practice test . Our NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Simulator will help you assess your level of preparation and understand your strengths and weaknesses. Below you can read all the quizzes you will find in our NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Simulator and how our unique NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Database made up of real questions:

Info quiz:

  • Quiz name:NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2
  • Total number of questions:56
  • Number of questions for the test:50
  • Pass score:80%

You can prepare for the NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 exams with our mobile app. It is very easy to use and even works offline in case of network failure, with all the functions you need to study and practice with our NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Simulator.

Use our Mobile App, available for both Android and iOS devices, with our NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Simulator . You can use it anywhere and always remember that our mobile app is free and available on all stores.

Our Mobile App contains all NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 practice tests which consist of 56 questions and also provide study material to pass the final NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 exam with guaranteed success. Our NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 database contain hundreds of questions and Fortinet Tests related to NSE6_FSW-7.2: Fortinet NSE 6 - FortiSwitch 7.2 Exam. This way you can practice anywhere you want, even offline without the internet.

BUY NOW