20:00

PDF|

Guide for NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer

Quiz NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer

Free Test
/ 10

Quiz

1/10
Refer to the exhibit, which shows the omitted output of a real-time OSPF debug



Certification Exam NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer Fortinet Fortinet-NSE7_NST-7.2 2-1234061133


Which statement is false?
Select the answer
1 correct answer
A.
A password has been configured on the local OSPF router but is not shown in the output
B.
The Hello packet is being sent from an OSPF router with ID 0.0.0.112.
C.
The two FortiGate devices attempting adjacency are in area 0.0.0.0.
D.
One FortiGate device is configured to require authentication, while the other is not

Quiz

2/10
Which of the following regarding protocol states is true?
Select the answer
1 correct answer
A.
proto_state=00 indicates that UDP traffic flows in both directions.
B.
proto_state-01 indicates an established TCP session.
C.
proto_state=10 indicates an established TCP session.
D.
proto state=01 indicates one-way ICMP traffic.

Quiz

3/10
Which statement is correct regarding LDAP authentication using the regular bind type?
Select the answer
1 correct answer
A.
The regular bind type goes through four steps to successfully authenticate a user.
B.
The regular bind type cannot be used if users are authenticated using sAMAccountName.
C.
The regular bind type is the easiest bind type to configure on FortiOS.
D.
The regular bind type requires a FortiGate super_admin account.

Quiz

4/10
Which two conditions would prevent a static route from being added to the routing table? (Choose
two.)
Select the answer
1 correct answer
A.
The next-hop IP address is unreachable.
B.
The interface specified in the route configuration is down
C.
The route has a lower priority value than another route to the same destination.
D.
There is another other route to the same destination, with a lower distance.

Quiz

5/10
Refer to the exhibit, which shows a truncated output of a real-time RADIUS debug.



Certification Exam NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer Fortinet Fortinet-NSE7_NST-7.2 4-2363519715


Which two statements are true? (Choose two.)
Select the answer
2 correct answers
A.
The RADIUS server queried for authentication is located at IP address 172.25.188.164.
B.
Authentication was unsuccessful.
C.
The authentication scheme used was pop3.
D.
Authentication was successful
E.
Two-factor authentication was required.

Quiz

6/10
Which three conditions are required for two FortiGate devices to form an OSPF adjacency? (Choose
three.)
Select the answer
2 correct answers
A.
OSPF link costs match.
B.
OSPF interface priority settings are unique
C.
OSPF interface network types match
D.
Authentication settings match.
E.
OSPF router IDs are unique.

Quiz

7/10
Refer to the exhibit, which contains the partial output of a diagnose command.




Certification Exam NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer Fortinet Fortinet-NSE7_NST-7.2 5-2144498746




Based on the output, which two statements are correct? (Choose two.)
Select the answer
3 correct answers
A.
The remote gateway IP is 10.200.5.1.
B.
The remote gateway has quick more selectors containing a destination subnet of 10.1.2.0/24.
C.
DPD is disabled.
D.
Anti-replay is enabled.

Quiz

8/10
Refer to the exhibit, which shows a session table entry.



Certification Exam NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer Fortinet Fortinet-NSE7_NST-7.2 6-1834183314


Which statement about FortiGate behavior relating to this session is true?
Select the answer
2 correct answers
A.
FortiGate forwarded this session without any inspection.
B.
FortiGate is performing a security profile inspection using the CPU.
C.
FortiGate redirected the client to the captive portal to authenticate, so that a correct policy match
could be made.
D.
FortiGate applied only IPS inspection to this session.

Quiz

9/10
What is the diagnose test application ipsmonitor 5 command used for?
Select the answer
1 correct answer
A.
To disable the IPS engine
B.
To provide information regarding IPS sessions
C.
To restart all IPS engines and monitors
D.
To enable IPS bypass mode

Quiz

10/10
Refer to the exhibit.



Certification Exam NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer Fortinet Fortinet-NSE7_NST-7.2 7-4054733542


Refer to the exhibit, which shows the modified output of the routing kernel.
Which statement is true?
Select the answer
1 correct answer
A.
The BGP route to 10.0.4.0/24 is not in the forwarding information base.
B.
The default static route through port2 is in the forwarding information base.
C.
The default static route through 10.200.1.254 is not in the forwarding information base.
D.
The egress interface associated with static route 8.8.8.8/32 is administratively up.
Looking for more questions?Buy now

NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer Practice test unlocks all online simulator questions

Thank you for choosing the free version of the NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer practice test! Further deepen your knowledge on Fortinet Simulator; by unlocking the full version of our NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer Simulator you will be able to take tests with over 39 constantly updated questions and easily pass your exam. 98% of people pass the exam in the first attempt after preparing with our 39 questions.

BUY NOW

What to expect from our NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer practice tests and how to prepare for any exam?

The NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer Simulator Practice Tests are part of the Fortinet Database and are the best way to prepare for any NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer exam. The NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer practice tests consist of 39 questions and are written by experts to help you and prepare you to pass the exam on the first attempt. The NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer database includes questions from previous and other exams, which means you will be able to practice simulating past and future questions. Preparation with NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer Simulator will also give you an idea of the time it will take to complete each section of the NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer practice test . It is important to note that the NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer Simulator does not replace the classic NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer study guides; however, the Simulator provides valuable insights into what to expect and how much work needs to be done to prepare for the NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer exam.

BUY NOW

NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer Practice test therefore represents an excellent tool to prepare for the actual exam together with our Fortinet practice test . Our NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer Simulator will help you assess your level of preparation and understand your strengths and weaknesses. Below you can read all the quizzes you will find in our NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer Simulator and how our unique NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer Database made up of real questions:

Info quiz:

  • Quiz name:NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer
  • Total number of questions:39
  • Number of questions for the test:50
  • Pass score:80%

You can prepare for the NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer exams with our mobile app. It is very easy to use and even works offline in case of network failure, with all the functions you need to study and practice with our NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer Simulator.

Use our Mobile App, available for both Android and iOS devices, with our NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer Simulator . You can use it anywhere and always remember that our mobile app is free and available on all stores.

Our Mobile App contains all NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer practice tests which consist of 39 questions and also provide study material to pass the final NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer exam with guaranteed success. Our NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer database contain hundreds of questions and Fortinet Tests related to NSE7_NST-7.2: Fortinet NSE 7 - Network Security 7.2 Support Engineer Exam. This way you can practice anywhere you want, even offline without the internet.

BUY NOW