The new flashcard feature is useful to memorize questions.
?Change your study mode
At any time, you can change the study mode, and alternate between the practice mode and the exam mode. In practice mode, you can configure for example the number of questions or tests, and other parameters to help you study.
Randomized | 10 Questions per Test | 20 Minutes | 70% to pass|
To re-configure your study mode again and change - for example - the number of tests, whether you have random questions and all other configuration parameters.
?Simulator Configuration
Auto-scroll: You can use the automatic scrolling of the questionnaire that occurs as soon as you answer one or all of the answers to a question correctly. Auto scrolling is activated if you answer a single answer, or as soon as you answer all the mandatory answers. Learning Mode: During learning mode you can get a real time result for your answer.
Free Test
Question: / 10
20:00Min. left
?Restart the current test
To restart the current test by clearing all your answers and the time used up to now. Warning: all answers will be lost.
Question: / 10
5.0(272 Votes)
Quiz
Question 1/101/10
Storage Fundamentals and RAID Technologies
Storage Fundamentals and RAID Technologies
Storage Fundamentals and RAID Technologies
A 15,000 RPM SAS hard disk drive is installed in a back-end RAID group. Approximately what is its average rotational latency?
Select the answer:Select the answer
1 correct answer
A.
2 ms
B.
1 ms
C.
4 ms
D.
8 ms
Explanation: Average rotational latency is the average time a disk platter takes to spin so that the target sector reaches the read/write head, and it is calculated as half of the time needed for one full revolution. One revolution time equals sixty thousand milliseconds divided by the rotational speed in revolutions per minute. At fifteen thousand RPM, one revolution takes four milliseconds, so the average wait, assuming the target sector is equally likely to be anywhere around the platter, is half of that, or two milliseconds. This value is a fixed mechanical characteristic of a given spindle speed and does not depend on where data is logically stored. It is one of two mechanical delay components that make up total access time on a rotating disk, the other being seek time, which is the time needed to move the actuator arm to the correct track. Together, seek time and rotational latency explain why mechanical hard disks perform poorly under random small-block workloads compared to sequential workloads, and why higher-RPM enterprise drives, and ultimately flash media with no moving parts at all, deliver substantially lower and more predictable latency for random access patterns.
Right Answer: A
Quiz
Question 2/102/10
Huawei OceanStor Product Architecture
Huawei OceanStor Product Architecture
Huawei OceanStor Product Architecture
In the OceanStor Dorado SmartMatrix full-mesh architecture, front-end interface modules are physically decoupled from individual controllers and connected to every controller through a switched internal fabric. What is the primary benefit of this design when a single controller fails?
Select the answer:Select the answer
1 correct answer
A.
Front-end bandwidth doubles as the failed controller's ports move to the interface modules
B.
Host I/O continues uninterrupted, since every port stays reachable from the surviving controllers
C.
The BBU becomes unnecessary, since SmartMatrix removes the need to cache writes before acknowledgment
D.
RAID 2.0+ reconstruction is skipped entirely, since SmartMatrix reroutes data straight to spare capacity
Explanation: In a conventional dual-controller array, each front-end port belongs to one controller, so when that controller fails the host's multipathing software must detect the failed path and switch traffic to a path owned by the surviving controller, which introduces a brief interruption and depends entirely on correct host-side configuration. SmartMatrix changes this by connecting every front-end interface module to every controller through an internal non-blocking switching fabric, so a port is not permanently bound to one controller's ownership. When a controller fails, the surviving controllers simply take over the logical ownership of that controller's resources internally while the physical port and cabling never change, so from the host's perspective the same path stays reachable and I/O continues with only the reconstruction time needed to resume in-flight operations. This does not increase raw bandwidth, since total front-end throughput is still bounded by the physical ports and their line rate, and mirroring write cache between controllers, backed by the battery backup unit, remains essential regardless of interface module sharing. RAID or erasure-coding reconstruction of data on physical disks is a separate mechanism entirely unrelated to how front-end ports are shared among controllers.
Right Answer: B
Quiz
Question 3/103/10
SAN and NAS Protocols
SAN and NAS Protocols
SAN and NAS Protocols
Which Fibre Channel layer is responsible for encoding and decoding the physical bit stream, using schemes such as 8b/10b or 64b/66b encoding, before transmission over the physical media?
Select the answer:Select the answer
1 correct answer
A.
FC-1
B.
FC-0
C.
FC-2
D.
FC-4
Explanation: The Fibre Channel protocol stack is organized into five layers, FC-0 through FC-4, each with a distinct role. FC-0 defines the physical layer components such as cables, connectors, transceivers, and the electrical or optical signaling characteristics of the media. FC-1 sits above FC-0 and is responsible for the transmission protocol, including translating parallel data into a serial bit stream through encoding schemes such as 8b/10b for speeds up to 8 Gbps and 64b/66b for 16 Gbps and above, as well as generating and interpreting special ordered sets used for link initialization and primitive signaling. FC-2 handles framing, flow control, sequence and exchange management, and delivers the structured frame format used to carry upper-layer data. FC-3 is a rarely implemented common services layer intended for functions spanning multiple ports on a node, such as striping or encryption. FC-4 provides mapping between Fibre Channel and upper-layer protocols like SCSI or NVMe, translating those protocols' commands into Fibre Channel frames. Understanding this layered separation is essential for troubleshooting: encoding or signal integrity issues point to the transmission protocol layer, while framing or credit issues point to the framing layer, and application-level command failures point to the upper-layer mapping.
Right Answer: A
Quiz
Question 4/104/10
Storage Networking and Host Access
Storage Networking and Host Access
Storage Networking and Host Access
An architect is deciding between a single-fabric SAN design and a dual-fabric (A/B) design for a mission-critical FC-SAN. What is the primary reason dual fabric is the standard best practice over a single fabric, even one built with fully redundant switches?
Select the answer:Select the answer
1 correct answer
A.
Confines a fabric-wide fault to one fabric while the other keeps serving I/O
B.
Doubles available ISL bandwidth but adds no independent fault-isolation benefit
C.
Provides isolation benefits only for FCoE deployments, not native FC fabrics
D.
Redundant switch power supplies alone match the protection of a second fabric
Explanation: Even a single fabric built from switches with dual power supplies and redundant supervisors still shares one fabric-wide control plane: one zoning database, one set of name-server registrations, one merged topology, and one stream of fabric services traffic. A configuration mistake, a corrupted zoning database, a disruptive firmware defect, or a fabric-wide event such as a build/merge storm affects every device attached to that fabric regardless of how redundant the individual switch hardware is. Splitting the SAN into two independent fabrics, each with its own switches, zoning database, and name server, and attaching each host and array with at least one path per fabric, means a fault confined to fabric A cannot propagate into fabric B. Multipathing software on the host then continues delivering I/O over the surviving fabric while the other is repaired. This is why redundant hardware within one fabric is not treated as equivalent to true dual-fabric separation: the failure domain, not just the physical component count, is what determines resilience. Bandwidth increase is a secondary benefit at best, and the approach applies equally to native FC and FCoE deployments, not exclusively to one or the other.
Right Answer: A
Quiz
Question 5/105/10
SmartSeries Resource Optimization Features
SmartSeries Resource Optimization Features
SmartSeries Resource Optimization Features
On a Huawei OceanStor thin LUN, how is physical storage space actually consumed from the underlying storage pool as a host writes data?
Select the answer:Select the answer
1 correct answer
A.
Grains are allocated on demand only when host writes actually land
B.
The full logical capacity is reserved in the pool at creation
C.
Allocation begins only after the capacity usage alarm threshold trips
D.
Allocation begins only after a zero-page reclamation scan completes
Explanation: Thin provisioning is built on the principle of allocating physical capacity only when it is genuinely needed. When a thin LUN is created, it is presented to the host with its full logical capacity, but the storage pool does not reserve that much physical space up front. Instead, the controller tracks writes in fixed-size units, commonly called grains, and only maps and consumes physical extents from the pool the first time a given grain receives a write. Reads or writes to regions that have never been touched either return zeros or trigger a fresh allocation, but no physical space is consumed until data actually lands. This is what allows an administrator to create many thin LUNs whose combined logical capacity exceeds the pool's physical capacity, since usage grows gradually with real data rather than at provisioning time. Capacity alarms and zero-page reclamation are separate mechanisms: alarms warn about pool fullness after allocation has already been happening, and reclamation returns already-allocated space that is no longer needed. Neither of those triggers the initial allocation itself; the allocation is purely a function of incoming host writes touching previously unmapped regions of the LUN.
Right Answer: A
Quiz
Question 6/106/10
HyperSeries Data Protection Features
HyperSeries Data Protection Features
HyperSeries Data Protection Features
In HyperSnap, when a redirect-on-write (ROW) snapshot has been created for a source LUN and the host subsequently issues a write to a block that existed at the snapshot time, what happens to preserve the snapshot data?
Select the answer:Select the answer
1 correct answer
A.
Write redirected to a new block; LUN mapping updated; original block kept for the snapshot
B.
Original block copied to reserved snapshot space, then new data overwrites the source location
C.
Write held in cache until the snapshot is deleted, then committed to the source block
D.
New data overwrites the original block; snapshot value rebuilt from a separate journal log
Explanation: ROW snapshot technology changes where a new write physically lands, not what happens to the old data. When a snapshot exists and the host writes to a block that was part of the point-in-time image, the storage system allocates a fresh block, writes the new data there, and updates the LUN's pointer or mapping table so the live LUN now references the new block; the original block is left untouched and is retained because it is still referenced by the snapshot's own mapping table. This design requires a single write operation for any updated block, which is why redirect-on-write imposes much lower latency overhead than copy-on-write schemes, where the storage engine must first read and copy the pre-write data into reserved snapshot space before allowing the overwrite to proceed, effectively doubling the I/O work for the first write to each block after a snapshot. Holding writes in cache until deletion would violate write-ordering and durability guarantees hosts depend on, and reconstructing old values from a separate journal is not how block-mapping-based snapshot technologies preserve point-in-time data; they rely on pointer indirection rather than log replay for this purpose.
Right Answer: A
Quiz
Question 7/107/10
Active-Active and 3DC Disaster Recovery Solutions
Active-Active and 3DC Disaster Recovery Solutions
Active-Active and 3DC Disaster Recovery Solutions
What fundamentally defines a HyperMetro LUN pair in a block-storage active-active deployment?
Select the answer:Select the answer
1 correct answer
A.
Two LUNs on separate arrays, synchronously mirrored, both concurrently readable and writable from either site.
B.
A primary LUN periodically copied to a secondary LUN on a schedule, with only the primary accepting writes.
C.
Two LUNs sharing one WWN, presented as a single device with no underlying synchronization engine.
D.
A pair automatically formed whenever two arrays share a Fibre Channel connection, without explicit creation.
Explanation: The defining property of an active-active LUN pair is that both member LUNs are kept identical through continuous synchronous mirroring, and both are simultaneously writable and readable by hosts at either site, presented under a shared identity so multipathing software treats them as one logical device. This is fundamentally different from a scheduled or interval-based copy, where only one side accepts writes and the secondary lags behind by the copy interval, which cannot support true concurrent dual-site access or guarantee zero data loss on a site failure. It is also more than a shared identifier alone; simply exposing the same WWN without an underlying synchronization engine would let the two arrays' data silently diverge the moment any write occurred, since nothing would propagate changes between them. Pair creation is also a deliberate administrative action requiring capacity, mapping, and consistency group planning; it is never established implicitly just because a physical link exists between two arrays. Understanding this distinguishes HyperMetro from asynchronous remote replication and from simple physical connectivity, and explains why the pair relationship, its consistency group membership, and its synchronization state must be explicitly monitored during operation and troubleshooting.
Right Answer: A
Quiz
Question 8/108/10
Distributed Storage and OceanStor Pacific
Distributed Storage and OceanStor Pacific
Distributed Storage and OceanStor Pacific
In a shared-nothing scale-out distributed storage architecture such as OceanStor Pacific, which statement best describes how capacity and performance are increased?
Select the answer:Select the answer
1 correct answer
A.
Independent nodes, each with its own CPU, memory, and disks, are added, and data is redistributed across the cluster.
B.
Extra controllers are added to a fixed active-active pair, sharing the same backend disk enclosure.
C.
A single centralized metadata server is scaled vertically with faster CPUs and more memory.
D.
Additional cache modules are installed in the existing enclosure to speed up all nodes uniformly.
Explanation: Shared-nothing means every node owns its own compute, memory, and storage resources and cooperates with peers only over the network, with no shared backplane, shared controller pair, or shared memory acting as a common resource. Growth is achieved by adding whole nodes, and both capacity and aggregate performance scale roughly linearly because each new node contributes its own CPU cycles, memory, network ports, and disks rather than competing for a fixed shared resource. This is fundamentally different from a traditional dual-controller array, where two controllers form a hard ceiling on total IOPS and throughput regardless of how many disk shelves are attached behind them; once that ceiling is reached, the only remedies are a costly controller upgrade or deploying an entirely separate array. Vertically scaling a single centralized coordinator also does not remove the single point of contention, since one component still mediates every operation. Adding cache alone likewise does not increase the underlying compute or disk parallelism available to service more concurrent workloads. Recognizing shared-nothing as the structural reason distributed storage scales smoothly is foundational to understanding why OceanStor Pacific clusters can grow from a handful of nodes to very large deployments without redesigning the architecture.
Right Answer: A
Quiz
Question 9/109/10
Storage Virtualization and Backup Solutions
Storage Virtualization and Backup Solutions
Storage Virtualization and Backup Solutions
In a VMware vSphere cluster connected to Huawei OceanStor storage via VAAI, which hardware-assisted primitive replaces SCSI-2 reservations to reduce lock contention when many VMs on different hosts share a single VMFS datastore?
Select the answer:Select the answer
1 correct answer
A.
Atomic Test and Set (ATS) locking
B.
Full Copy (XCOPY) block clone
C.
Write Same (block zeroing)
D.
Thin Provisioning UNMAP reclaim
Explanation: Before hardware-assisted locking existed, any metadata-changing operation on a VMFS datastore, such as powering on a VM, growing a thin disk, or taking a snapshot, required the host to place a full SCSI-2 reservation on the entire LUN, locking out every other host for the duration. As virtual machine density grew, this became a serious bottleneck because unrelated hosts queued behind a single lock even though they wanted to touch completely different files. The atomic compare-and-write primitive lets the array perform the lock at a much finer granularity, testing and setting a single disk sector instead of the whole volume, so only the specific metadata block being updated is protected while the rest of the datastore remains fully accessible to other hosts. This dramatically reduces queuing and latency in large, heavily shared VMFS environments and is essential for scaling VM density per datastore. The other primitives address different problems: one offloads bulk data copying, another offloads zero-fill operations, and another reclaims dead space; none of them touch the metadata locking mechanism that this primitive specifically replaces.
Right Answer: A
Quiz
Question 10/1010/10
Storage O and M Performance Tuning and Troubleshooting
Storage O and M Performance Tuning and Troubleshooting
Storage O and M Performance Tuning and Troubleshooting
An engineer needs to perform daily monitoring of an OceanStor storage system, including checking alarm status, viewing capacity usage, and creating LUNs, using a graphical interface reachable from a standard web browser without installing any client software. Which management tool best fits this requirement?
Select the answer:Select the answer
1 correct answer
A.
DeviceManager, the browser-based embedded GUI for daily configuration and monitoring
B.
SmartKit, a separate maintenance toolkit for inspections and firmware upgrades
C.
CLI developer view, a restricted command-line context for advanced diagnostics
D.
Third-party SNMP browser, a generic tool with no array object awareness
Explanation: The embedded web-based management interface on Huawei OceanStor controllers provides a graphical, browser-accessible console for configuration, monitoring, and basic maintenance without requiring any client installation, and it is the primary day-to-day interface most administrators use for tasks such as creating LUNs, mapping hosts, checking alarms, and viewing capacity and performance dashboards. A toolkit installed on a separate maintenance terminal is instead used for structured activities such as health checks, inspections, firmware upgrades, and log collection, and while it can also reach the array over the network it is a distinct downloadable application rather than a browser-native console. The command line, whether in its standard operating view or its restricted diagnostic view, is a text-based interface generally reserved for scripting, batch operations, or advanced troubleshooting under support guidance, not routine graphical monitoring. A generic third-party SNMP browser can poll numeric alarm and performance object identifiers but has no concept of the array's LUN, pool, or host objects and cannot perform configuration actions, so it cannot substitute for the vendor console in daily operations.
H13-629_V2.0: HCIE-Storage (Written) V2.0 Practice test unlocks all online simulator questions
Thank you for choosing the free version of the H13-629_V2.0: HCIE-Storage (Written) V2.0 practice test! Further deepen your knowledge on Huawei Simulator; by unlocking the full version of our H13-629_V2.0: HCIE-Storage (Written) V2.0 Simulator you will be able to take tests with over 400 constantly updated questions and easily pass your exam. 98% of people pass the exam in the first attempt after preparing with our 400 questions.
What to expect from our H13-629_V2.0: HCIE-Storage (Written) V2.0 practice tests and how to prepare for any exam?
The H13-629_V2.0: HCIE-Storage (Written) V2.0 Simulator Practice Tests are part of the Huawei Database and are the best way to prepare for any H13-629_V2.0: HCIE-Storage (Written) V2.0 exam. The H13-629_V2.0: HCIE-Storage (Written) V2.0 practice tests consist of 400 questions and are written by experts to help you and prepare you to pass the exam on the first attempt. The H13-629_V2.0: HCIE-Storage (Written) V2.0 database includes questions from previous and other exams, which means you will be able to practice simulating past and future questions. Preparation with H13-629_V2.0: HCIE-Storage (Written) V2.0 Simulator will also give you an idea of the time it will take to complete each section of the H13-629_V2.0: HCIE-Storage (Written) V2.0 practice test . It is important to note that the H13-629_V2.0: HCIE-Storage (Written) V2.0 Simulator does not replace the classic H13-629_V2.0: HCIE-Storage (Written) V2.0 study guides; however, the Simulator provides valuable insights into what to expect and how much work needs to be done to prepare for the H13-629_V2.0: HCIE-Storage (Written) V2.0 exam.
H13-629_V2.0: HCIE-Storage (Written) V2.0 Practice test therefore represents an excellent tool to prepare for the actual exam together with our Huawei practice test . Our H13-629_V2.0: HCIE-Storage (Written) V2.0 Simulator will help you assess your level of preparation and understand your strengths and weaknesses. Below you can read all the quizzes you will find in our H13-629_V2.0: HCIE-Storage (Written) V2.0 Simulator and how our unique H13-629_V2.0: HCIE-Storage (Written) V2.0 Database made up of real questions:
You can prepare for the H13-629_V2.0: HCIE-Storage (Written) V2.0 exams with our mobile app. It is very easy to use and even works offline in case of network failure, with all the functions you need to study and practice with our H13-629_V2.0: HCIE-Storage (Written) V2.0 Simulator.
Use our Mobile App, available for both Android and iOS devices, with our H13-629_V2.0: HCIE-Storage (Written) V2.0 Simulator . You can use it anywhere and always remember that our mobile app is free and available on all stores.
Our Mobile App contains all H13-629_V2.0: HCIE-Storage (Written) V2.0 practice tests which consist of 400 questions and also provide study material to pass the final H13-629_V2.0: HCIE-Storage (Written) V2.0 exam with guaranteed success.
Our H13-629_V2.0: HCIE-Storage (Written) V2.0 database contain hundreds of questions and Huawei Tests related to H13-629_V2.0: HCIE-Storage (Written) V2.0 Exam. This way you can practice anywhere you want, even offline without the internet.