20:00

Free Test
/ 10

Quiz

1/10
Records and Reporting
Under the 1988 federal UST technical standards, how long must the owner or operator keep the results of release detection sampling, testing, or monitoring?
Select the answer
1 correct answer
A.
At least 6 months
B.
At least 1 year
C.
At least 3 years
D.
At least 10 years

Quiz

2/10
Site Preparation / Layout
When scheduling a tank tightness test, which information is most important to request from the owner before mobilizing to the site?
Select the answer
1 correct answer
A.
Only the street address, since everything else is checked on site
B.
Only the brand and model of the automatic tank gauge
C.
Only the invoice from the most recent fuel delivery
D.
Tank capacity, material, age, product, piping layout, and tank charts

Quiz

3/10
Placement of Equipment
When inserting a level and temperature probe through a tank opening, how should it be positioned?
Select the answer
1 correct answer
A.
Resting firmly on the tank bottom for stability
B.
Tied against the drop tube to keep it from swinging
C.
Suspended plumb, clear of the drop tube and the tank bottom
D.
Angled toward the tank end so it can measure end deflection

Quiz

4/10
Secondary Containment
A liquid sensor installed in the interstitial space of a double-wall tank goes into alarm. What does this most likely indicate?
Select the answer
1 correct answer
A.
Liquid entered the interstice through a breach in either wall
B.
The tank has been overfilled and product is backing up in the fill pipe
C.
The tank's product level has dropped below the sensor's set point
D.
The sensor is reporting normal condensation that can be ignored

Quiz

5/10
Vapor Recovery Systems
Which statement correctly describes Stage I vapor recovery at a motor fuel dispensing facility?
Select the answer
1 correct answer
A.
It captures vapors from vehicle tanks during customer refueling
B.
It captures vapors displaced from the UST during cargo tank delivery
C.
It captures vapors only from the dispenser sump during maintenance
D.
It captures vapors from the cargo tank as it is loaded at the terminal

Quiz

6/10
Test Variables & Leak Detection
Under the federal UST technical standards, what performance must a tank tightness test method be capable of achieving?
Select the answer
1 correct answer
A.
Detect a 0.2 gal/h leak rate with a probability of detection of 0.95 and a probability of false alarm of 0.05
B.
Detect a 0.05 gal/h leak rate with a probability of detection of 0.99 and a probability of false alarm of 0.01
C.
Detect a 0.1 gal/h leak rate with a probability of detection of 0.95 and a probability of false alarm of 0.05
D.
Detect a 1.0 gal/h leak rate with a probability of detection of 0.90 and a probability of false alarm of 0.10

Quiz

7/10
Testing of Piping Systems
A service station has underground pressurized piping fed by a submersible turbine pump. Under the federal UST technical standards, which combination of release detection satisfies the requirement for this piping?
Select the answer
1 correct answer
A.
Monthly inventory control and a line tightness test every 3 years
B.
An automatic line leak detector alone, functionally tested every 3 years
C.
A line tightness test every 3 years with no line leak detector installed
D.
An automatic line leak detector plus an annual line tightness test

Quiz

8/10
Volumetric Tank Tightness Testing
In an overfilled volumetric tank tightness test, the technician fills the tank until the product level rises into the fill pipe or an attached standpipe. What is the main measurement reason for doing this?
Select the answer
1 correct answer
A.
It removes the need to correct the data for product temperature changes
B.
It keeps the product in contact with the tank top so evaporation is increased
C.
It lets the test be run without stopping deliveries or dispensing at the site
D.
A small volume change produces a large, easily measured change in level

Quiz

9/10
Nonvolumetric Tightness Testing
How does a tracer (chemical marker) tank tightness test detect a leak?
Select the answer
1 correct answer
A.
A tracer added to the product is sampled for in soil gas from probes near the tank
B.
A tracer gas is pumped into the ullage and its pressure decay is timed with a gauge
C.
A dye is added to the product and the tank interior is inspected with a camera
D.
A tracer is added to groundwater wells and later measured in the tank bottom water

Quiz

10/10
Health and Safety for UST Workers
Which range of vapor concentrations in air, by volume, is generally accepted as the flammable range for gasoline vapor?
Select the answer
1 correct answer
A.
About 1.4 percent to about 7.6 percent
B.
About 0.5 percent to about 3.0 percent
C.
About 5.0 percent to about 15.0 percent
D.
About 10 percent to about 40 percent
Looking for more questions?Buy now

U3: U3-UST Tank Tightness Testing Practice test unlocks all online simulator questions

Thank you for choosing the free version of the U3: U3-UST Tank Tightness Testing practice test! Further deepen your knowledge on ICC - International Code Council Simulator; by unlocking the full version of our U3: U3-UST Tank Tightness Testing Simulator you will be able to take tests with over 331 constantly updated questions and easily pass your exam. 98% of people pass the exam in the first attempt after preparing with our 331 questions.

BUY NOW

What to expect from our U3: U3-UST Tank Tightness Testing practice tests and how to prepare for any exam?

The U3: U3-UST Tank Tightness Testing Simulator Practice Tests are part of the ICC - International Code Council Database and are the best way to prepare for any U3: U3-UST Tank Tightness Testing exam. The U3: U3-UST Tank Tightness Testing practice tests consist of 331 questions and are written by experts to help you and prepare you to pass the exam on the first attempt. The U3: U3-UST Tank Tightness Testing database includes questions from previous and other exams, which means you will be able to practice simulating past and future questions. Preparation with U3: U3-UST Tank Tightness Testing Simulator will also give you an idea of the time it will take to complete each section of the U3: U3-UST Tank Tightness Testing practice test . It is important to note that the U3: U3-UST Tank Tightness Testing Simulator does not replace the classic U3: U3-UST Tank Tightness Testing study guides; however, the Simulator provides valuable insights into what to expect and how much work needs to be done to prepare for the U3: U3-UST Tank Tightness Testing exam.

BUY NOW

U3: U3-UST Tank Tightness Testing Practice test therefore represents an excellent tool to prepare for the actual exam together with our ICC - International Code Council practice test . Our U3: U3-UST Tank Tightness Testing Simulator will help you assess your level of preparation and understand your strengths and weaknesses. Below you can read all the quizzes you will find in our U3: U3-UST Tank Tightness Testing Simulator and how our unique U3: U3-UST Tank Tightness Testing Database made up of real questions:

Info quiz:

  • Quiz name:U3: U3-UST Tank Tightness Testing
  • Total number of questions:331
  • Number of questions for the test:50
  • Pass score:80%

You can prepare for the U3: U3-UST Tank Tightness Testing exams with our mobile app. It is very easy to use and even works offline in case of network failure, with all the functions you need to study and practice with our U3: U3-UST Tank Tightness Testing Simulator.

Use our Mobile App, available for both Android and iOS devices, with our U3: U3-UST Tank Tightness Testing Simulator . You can use it anywhere and always remember that our mobile app is free and available on all stores.

Our Mobile App contains all U3: U3-UST Tank Tightness Testing practice tests which consist of 331 questions and also provide study material to pass the final U3: U3-UST Tank Tightness Testing exam with guaranteed success. Our U3: U3-UST Tank Tightness Testing database contain hundreds of questions and ICC - International Code Council Tests related to U3: U3-UST Tank Tightness Testing Exam. This way you can practice anywhere you want, even offline without the internet.

BUY NOW