The new flashcard feature is useful to memorize questions.
?Change your study mode
At any time, you can change the study mode, and alternate between the practice mode and the exam mode. In practice mode, you can configure for example the number of questions or tests, and other parameters to help you study.
Randomized | 10 Questions per Test | 20 Minutes | 70% to pass|
To re-configure your study mode again and change - for example - the number of tests, whether you have random questions and all other configuration parameters.
?Simulator Configuration
Auto-scroll: You can use the automatic scrolling of the questionnaire that occurs as soon as you answer one or all of the answers to a question correctly. Auto scrolling is activated if you answer a single answer, or as soon as you answer all the mandatory answers. Learning Mode: During learning mode you can get a real time result for your answer.
Free Test
Question: / 10
20:00Min. left
?Restart the current test
To restart the current test by clearing all your answers and the time used up to now. Warning: all answers will be lost.
Question: / 10
4.6(306 Votes)
Quiz
Question 1/101/10
ICX reserves some VLAN IDs for system functions. How many VLAN IDs are reserved?
Select the answer:Select the answer
1 correct answer
A.
9
B.
7
C.
3
D.
5
The correct answer is D. 5 ICX switches reserve a small number of VLAN IDs for internal system use. These reserved VLANs are not available for normal user-created VLANs because the switch uses them for functions such as management, control traffic, or other internal operations. In ICX, there are 5 VLAN IDs reserved for system functions. Why the other options are incorrect: A. 9 — too many; ICX does not reserve this many VLAN IDs for system functions. B. 7 — also incorrect; this is not the documented number of reserved VLAN IDs. C. 3 — too few; ICX reserves more than three VLAN IDs. So the correct choice is D. 5.
Right Answer: D
Quiz
Question 2/102/10
A Wi-Fi access point is configured for management traffic on the default VLAN and a guest SSID on VLAN 10. The access point is connected to port 1/1/10. What is the correct configuration?
The correct answer is B. The access point has two types of traffic: - Management traffic on the default VLAN - Guest SSID traffic on VLAN 10 The AP is connected to port 1/1/10, so that switch port must carry both VLANs: - The management VLAN must be untagged if it is the default/native VLAN - The guest VLAN 10 must be tagged because it is a separate VLAN carried over the same physical link Why B is correct: - vlan 1 no untagged ethernet 1/1/10 - vlan 10 tagged ethernet 1/1/10 This means: - VLAN 1 is the untagged/native VLAN for the AP management traffic - VLAN 10 is tagged for the guest SSID traffic Why the other options are wrong: A. vlan 1 no tagged ethernet 1/1/10 ! vlan 10 untagged ethernet 1/1/10 - This would make VLAN 10 untagged, which is not correct for guest traffic when sharing the port with another VLAN. - It also implies VLAN 1 is not tagged, but the key issue is that the VLAN assignment does not match the expected trunk behavior. C. vlan 10 tagged ethernet 1/1/10 - This only configures VLAN 10. - It does not allow management traffic on the default VLAN, so the AP management plane would not work properly. D. vlan 10 no untagged ethernet 1/1/10 - This is not the correct way to configure a trunk carrying both management and guest traffic. - It does not establish VLAN 1 for management. Key concept: When a device like an AP uses one VLAN for management and another for client/guest traffic, the switch port is typically configured as a trunk: - Native/untagged VLAN for management - Tagged VLANs for user or guest SSIDs So the correct configuration is B.
Right Answer: B
Quiz
Question 3/103/10
Which configuration steps will add untagged ethernet ports 1/1/1 and 1/1/2 and tagged ethernet port 1/2/1 to VLAN 10?
untagged ethernet 1/1/1 to 1/1/2 tagged ethernet 1/2/1 vlan 10
C.
vlan 10 no tagged ethernet 1/1/1 to 1/1/2 tagged ethernet 1/2/1
D.
vlan 10 untagged ethernet 1/1/1 to 1/1/2 tagged ethernet 1/2/1
The correct answer is D. To add ports to a VLAN, the configuration must be done from within the VLAN context. In other words, you first enter VLAN 10, and then assign ports to it as either untagged or tagged. What the question asks for: - Ethernet 1/1/1 and 1/1/2 should be untagged in VLAN 10 - Ethernet 1/2/1 should be tagged in VLAN 10 Why D is correct: - vlan 10 This enters the VLAN configuration mode for VLAN 10. - untagged ethernet 1/1/1 to 1/1/2 This adds ports 1/1/1 and 1/1/2 as untagged members of VLAN 10. - tagged ethernet 1/2/1 This adds port 1/2/1 as a tagged member of VLAN 10. Why the other options are incorrect: A. untagged ethernet 1/1/1 to 1/1/2 vlan 10 tagged ethernet 1/2/1 vlan 10 - This is not the proper syntax because the VLAN must be selected first. B. untagged ethernet 1/1/1 to 1/1/2 tagged ethernet 1/2/1 vlan 10 - This also places vlan 10 at the end, which is not the correct order. C. vlan 10 no tagged ethernet 1/1/1 to 1/1/2 tagged ethernet 1/2/1 - The use of no tagged is incorrect here because ports 1/1/1 and 1/1/2 need to be untagged, not removed from tagged membership in this way. Final answer: D. vlan 10 untagged ethernet 1/1/1 to 1/1/2 tagged ethernet 1/2/1
Right Answer: D
Quiz
Question 4/104/10
Which device will become the root in the Spanning Tree election process?
Select the answer:Select the answer
1 correct answer
A.
the device with root guard enabled
B.
the device with the highest IP address
C.
the device with the lowest bridge ID
D.
the device with the highest bridge priority value
The correct answer is D. the device with the highest bridge priority value In Spanning Tree Protocol, the root bridge is elected based on the lowest Bridge ID, not the highest. A Bridge ID is made up of two main parts: 1. Bridge priority 2. MAC address The device with the lowest bridge priority wins the election. If multiple devices have the same priority, the device with the lowest MAC address becomes the root bridge. Why the other options are incorrect: A. the device with root guard enabled Root guard does not help a switch become the root bridge. It is a protection feature used to prevent unexpected devices from becoming root. B. the device with the highest IP address STP does not use IP addresses in the root bridge election process. C. the device with the lowest bridge ID This is actually how the root bridge is chosen in STP, so this option would normally be correct in a standard STP question. However, it conflicts with the provided correct answer. D. the device with the highest bridge priority value This is incorrect for standard STP, because the root bridge is selected by the lowest bridge priority value, not the highest. Important note: There appears to be a mismatch between the question and the provided correct answer. In standard Spanning Tree Protocol, the correct answer should be C, not D. If you want, I can also explain how Bridge ID and root bridge election work step by step.
Right Answer: D
Quiz
Question 5/105/10
The root bridge is connected to another switch over two independent 10Gbe links. Which link will remain in a forwarding state on both sides?
Select the answer:Select the answer
1 correct answer
A.
the link with the lowest port number on the non-root switch
B.
the link with the lowest port number on the root switch
C.
the link with the highest port number on the root switch
D.
the link with the highest port number on the non-root switch
The correct answer is B. the link with the lowest port number on the root switch. This question is about Spanning Tree Protocol (STP), which prevents loops in a switched network by blocking some redundant links. When two switches are connected by multiple parallel links, STP decides which one stays forwarding and which one gets blocked. In this case: - One switch is the root bridge. - The root bridge is connected to another switch using two separate 10Gbe links. - STP will allow only one of those links to remain forwarding to avoid a loop. How STP chooses the active link: 1. The root bridge always has the best path to itself, so its ports are typically designated ports and remain forwarding. 2. When there are multiple equal-cost links between the root and another switch, STP uses port priority and port number as tie-breakers. 3. The port on the root bridge with the lowest port number wins and remains forwarding. 4. The corresponding connected port on the other switch also forwards on that same link. Why B is correct: - Since the root bridge is making the choice in this scenario, the link connected to the lowest-numbered port on the root switch will remain forwarding. - The other parallel link will be placed into a blocking/discarding state to prevent a loop. Why the others are incorrect: - A: The non-root switch does not decide which parallel root-facing link is selected when tie-breaking is based on the root bridge side. - C: STP prefers the lowest port number, not the highest. - D: The highest port number on the non-root switch is not the deciding factor. Final answer: B. the link with the lowest port number on the root switch
Right Answer: B
Quiz
Question 6/106/10
Which two commands display Power over Ethernet (PoE) power budget? (Choose two.)
Select multiple answer: (Choose 2)Select the answer
2 correct answers
A.
show configuration
B.
show inline power
C.
show version
D.
show chassis
E.
show inline power detail
The correct answers are B. show inline power and E. show inline power detail. Power over Ethernet (PoE) power budget refers to the amount of power available on a device, such as a switch, to supply to connected powered devices like IP phones, access points, or cameras. To view this information, you would use commands related specifically to inline power. Why B is correct: show inline power This command typically displays a summary of PoE status on the device, including available power, used power, and remaining power budget. It is one of the standard commands for checking overall PoE allocation. Why E is correct: show inline power detail This command provides a more detailed view of PoE information. In addition to the overall power budget, it may show power allocation per port, device status, and other PoE-related statistics. Because it includes detailed power budget information, it is also a correct choice. Why the other options are incorrect: A. show configuration This displays the device’s configuration, not PoE power budget information. C. show version This shows software version, hardware model, and system uptime, but not PoE budget. D. show chassis This typically shows chassis-related hardware information, and while it may include some power details on certain platforms, it is not the standard command for PoE power budget in this context. In summary, the commands specifically used to display PoE power budget are: B. show inline power E. show inline power detail
Right Answer: B, E
Quiz
Question 7/107/10
As an IP packet is routed across subnets, which value gets updated at each hop?
Select the answer:Select the answer
1 correct answer
A.
destination MAC address
B.
destination IP address
C.
source IP address
D.
subnet mask
The correct answer is A. destination MAC address. Here’s why: When an IP packet travels across multiple subnets, the Layer 3 information in the packet, such as the source IP address and destination IP address, generally stays the same from end to end. However, at each hop, the packet is encapsulated in a new Layer 2 frame for the next segment of the journey. At each router hop: - The router removes the incoming Layer 2 frame. - It then creates a new Layer 2 frame to send the packet to the next hop. - In that new frame, the destination MAC address changes to the MAC address of the next router or the final host on that local network. Why the other options are incorrect: - B. destination IP address: This usually does not change while routing across subnets. - C. source IP address: This also normally remains unchanged, except in special cases like NAT. - D. subnet mask: This is not updated hop by hop; it is a local network configuration value. So, the value updated at each hop is the destination MAC address, because MAC addresses are only meaningful on the local network segment.
Right Answer: A
Quiz
Question 8/108/10
What is the highest Power over Ethernet (PoE) power class supported by 802.3bt?
Select the answer:Select the answer
1 correct answer
A.
8
B.
4
C.
1
D.
16
The correct answer is A. 8 IEEE 802.3bt is the PoE standard that extends power delivery beyond earlier PoE versions like 802.3af and 802.3at. It introduces higher power classes to support more demanding devices such as advanced wireless access points, cameras, lighting, and thin clients. The highest power class supported by 802.3bt is Class 8. This class allows the greatest power delivery in the PoE classification system defined by the standard. Why the other options are incorrect: B. 4 This is a lower power class used in earlier PoE standards, not the highest in 802.3bt. C. 1 This is one of the lowest PoE classes, intended for devices with minimal power needs. D. 16 This is not a valid PoE class in the 802.3bt classification system. So the highest PoE power class supported by 802.3bt is Class 8.
Right Answer: A
Quiz
Question 9/109/10
Which function is performed by ARP protocol?
Select the answer:Select the answer
1 correct answer
A.
resolve IP address to MAC address
B.
discover directly connected neighbors
C.
build and maintain switch MAC tables
D.
resolve host name
The correct answer is C, but there is an important issue with the question as written. ARP stands for Address Resolution Protocol. Its actual function is to map an IP address to a MAC address on a local network. So the correct networking answer would normally be: A. resolve IP address to MAC address Why the other options are wrong: B. discover directly connected neighbors This is not the main job of ARP. Some tools and protocols can help identify neighbors, but ARP itself is specifically for address resolution, not neighbor discovery. C. build and maintain switch MAC tables This is not ARP’s function. Switches build MAC tables by learning source MAC addresses from Ethernet frames. That is a switch function, not ARP. D. resolve host name This is done by DNS, not ARP. So, to be precise: - ARP resolves IP addresses to MAC addresses - Switches learn and maintain MAC address tables - DNS resolves host names If your source says the correct answer is C, then the question is likely incorrect or the answer key is wrong.
Right Answer: C
Quiz
Question 10/1010/10
What are two features of Open Shortest Path First (OSPF)? (Choose two.)
Select multiple answer: (Choose 2)Select the answer
2 correct answers
A.
utilizes distance vector
B.
calculates link cost
C.
automatic redistribution of routes
D.
updates routes dynamically
E.
uses exterior gateway protocols
The correct answer is A and D. Open Shortest Path First (OSPF) is a dynamic routing protocol used within an autonomous system. It is considered a link-state protocol, not a distance-vector protocol, but it does dynamically update routes when the network changes. Why A is considered correct: - In many exam contexts, this option is meant to contrast OSPF with static routing or other routing behaviors. - However, strictly speaking, OSPF does not utilize distance vector. It uses link-state routing. - If the provided answer key says A, that is likely based on a mistaken or loosely written question bank item. Why D is correct: - OSPF updates routes dynamically. - It learns about network changes and recalculates paths as needed. - This is one of its core features. Why the other options are not correct: - B. calculates link cost - OSPF does use cost as its metric, so this is actually also a true statement about OSPF. - OSPF chooses paths based on cumulative link cost. - C. automatic redistribution of routes - OSPF can redistribute routes, but this is not a defining feature of the protocol itself. - E. uses exterior gateway protocols - OSPF is an interior gateway protocol, not an exterior gateway protocol. Important note: - The answer key A, D is questionable because OSPF is not a distance-vector protocol. - If this were a strictly accurate technical question, the best answers would more likely be B and D. In summary: - If following the provided key: A and D - If answering based on correct OSPF behavior: B and D
RCNI: RUCKUS Certified Networking Implementer Practice test unlocks all online simulator questions
Thank you for choosing the free version of the RCNI: RUCKUS Certified Networking Implementer practice test! Further deepen your knowledge on RUCKUS Simulator; by unlocking the full version of our RCNI: RUCKUS Certified Networking Implementer Simulator you will be able to take tests with over 54 constantly updated questions and easily pass your exam. 98% of people pass the exam in the first attempt after preparing with our 54 questions.
What to expect from our RCNI: RUCKUS Certified Networking Implementer practice tests and how to prepare for any exam?
The RCNI: RUCKUS Certified Networking Implementer Simulator Practice Tests are part of the RUCKUS Database and are the best way to prepare for any RCNI: RUCKUS Certified Networking Implementer exam. The RCNI: RUCKUS Certified Networking Implementer practice tests consist of 54 questions and are written by experts to help you and prepare you to pass the exam on the first attempt. The RCNI: RUCKUS Certified Networking Implementer database includes questions from previous and other exams, which means you will be able to practice simulating past and future questions. Preparation with RCNI: RUCKUS Certified Networking Implementer Simulator will also give you an idea of the time it will take to complete each section of the RCNI: RUCKUS Certified Networking Implementer practice test . It is important to note that the RCNI: RUCKUS Certified Networking Implementer Simulator does not replace the classic RCNI: RUCKUS Certified Networking Implementer study guides; however, the Simulator provides valuable insights into what to expect and how much work needs to be done to prepare for the RCNI: RUCKUS Certified Networking Implementer exam.
RCNI: RUCKUS Certified Networking Implementer Practice test therefore represents an excellent tool to prepare for the actual exam together with our RUCKUS practice test . Our RCNI: RUCKUS Certified Networking Implementer Simulator will help you assess your level of preparation and understand your strengths and weaknesses. Below you can read all the quizzes you will find in our RCNI: RUCKUS Certified Networking Implementer Simulator and how our unique RCNI: RUCKUS Certified Networking Implementer Database made up of real questions:
You can prepare for the RCNI: RUCKUS Certified Networking Implementer exams with our mobile app. It is very easy to use and even works offline in case of network failure, with all the functions you need to study and practice with our RCNI: RUCKUS Certified Networking Implementer Simulator.
Use our Mobile App, available for both Android and iOS devices, with our RCNI: RUCKUS Certified Networking Implementer Simulator . You can use it anywhere and always remember that our mobile app is free and available on all stores.
Our Mobile App contains all RCNI: RUCKUS Certified Networking Implementer practice tests which consist of 54 questions and also provide study material to pass the final RCNI: RUCKUS Certified Networking Implementer exam with guaranteed success.
Our RCNI: RUCKUS Certified Networking Implementer database contain hundreds of questions and RUCKUS Tests related to RCNI: RUCKUS Certified Networking Implementer Exam. This way you can practice anywhere you want, even offline without the internet.