What to Do If You Fail a Certification Exam: Retake & Study Strategy
9 min.
15/11/2026
18/11/2026
To fail an exam may seem devastating. You may have invested weeks of time into studying, paid for the exam, but still got a failing grade. Disappointment is completely normal in this case. But that doesn’t mean that you can’t make it in your chosen industry.
The first step is to understand where you went wrong. Look at your score report and check which topics need more work. Also, read the exam provider’s rules before you book another test. A failed certification exam can help you understand what to change in your study routine.
Your next attempt should be based on facts, not guesswork. This guide covers score analysis, weak topics, retake rules, and study methods. It also compares beginner-friendly security credentials to help you plan your next steps.
How to Get Ready for the Next Attempt at a Certification Exam
Reading all your study materials again is not sufficient when you prepare for your second attempt. Instead, you need to conduct an analysis of your results, define your weak points, and work out an individual study plan. The recommendations below will assist you in evaluating your achievements and preparing for your second attempt. You can apply the information below when planning your second attempt.
Before starting your studying process anew, think about the reasons for your failure. It is not because you lack knowledge. It might be either because of the confusing questions or the inability to cope with time management.
Think about the following questions:
Do you know the main concepts but cannot deal with practical questions?
Did you confuse authentication with authorisation?
Are networking questions difficult for you?
Did you use up all your time on just a couple of questions?
Is it hard for you to understand the context of a question?
Was your concentration affected by the pressure?
For instance, you might know that multi-factor authentication requires at least two different proofs to identify a person. Yet, it is hard for you to choose the proper way of protection in the office environment.
It means that you will have to practise in this regard. A failed certification exam can show the gap between knowing a definition and using that knowledge. Write down the problems you faced. Use this list to plan your next round of study.
2. Read the Retake Policies Prior to Booking Another Test
Each exam provider has its own retake policies. While some allow you to repeat the exam preparation shortly after a failure, others may have more stringent waiting periods or number of attempts limits.
Prior to booking a certification exam retake, make sure to clarify the following:
What is the required waiting period after a failed attempt?
Whether the waiting period varies depending on the number of attempts.
What is the number of attempts allowed?
What is the cost of your next attempt?
Whether you are required to file another application.
Whether there has been any change to the exam syllabus.
Do not expect you can immediately book another attempt. Read the current retake policies on the official exam website.
Additionally, do not book another attempt just because the waiting period is over. Use the extra time to practice the subjects that posed difficulty for you during your previous attempt.
3. Make a Study Schedule for Your Weak Areas
You don’t have to equally divide time for all the topics. The first step is to analyze the syllabus of the test. Divide the syllabus into smaller parts and classify them as strong, average or weak.
If you are studying for an introductory-level cybersecurity test, some of the topics may be:
Basic concepts: Get an idea of the concepts of confidentiality, integrity, availability, and security controls.
Threats and risks: Know about the various forms of malware, phishing, social engineering, and system failures.
Network security: Know about TCP/IP, DNS, ports, firewalls, and VPN.
Access control: Get an idea about the concepts of passwords, user permissions, authentication, and authorization.
Security operations: Know about system logging, alerting, incident management and data restoration.
Spend time on those topics which have more weightage in the test and in areas where you do not perform well.
If you face problems in understanding network security, start from IP addresses and network protocols. Learn about the functioning of a firewall in controlling network traffic and learn how to read simple network maps.
4. Compare Beginner-Friendly Security Credentials
Your selection of certification also influences how you prepare yourself for it. Some cybersecurity certifications deal with fundamental concepts. Other certifications require you to be familiar with IT and networking.
Let us review three kinds.
Fundamental Cybersecurity Certification
This kind of certification is appropriate for those who are new to cybersecurity.
The concepts involved are usually:
Basic cybersecurity policies.
Internet threats.
Access and identity management.
Networking and cloud security fundamentals.
Operations Security.
Such a certification will provide an understanding of the language used in cybersecurity.
Broad, Vendor-Neutral Security Certification
This type covers a wider range of security topics. It may suit you if you already know the basics of IT, networking, and operating systems.
The syllabus may include:
Threat detection.
Vulnerability management.
Network and device security.
Cryptography.
Risk management.
Access control.
Incident response.
You may need more study time for this type of certification. It covers several areas of security, so you should have a good base in IT before you begin.
This type focuses on security tools used in a specific cloud or technology system.
You may study:
Cloud security.
User access and permissions.
Data protection.
Security rules.
Platform security tools.
This can be useful if you plan to work with a particular technology platform. Its syllabus is usually more focused than that of a broad security certification.
Before you choose, check the exam topics, entry-level requirements, fee, renewal rules, and job roles linked to the credential.
5. Utilize Practice Exams Correctly
Practice exams are useful to assess your knowledge. But going from one test to another without analyzing your mistakes will not be beneficial.
Following each exam, record the following data:
The subject matter of the question.
Why the answer is incorrect.
Why the correct answer is correct.
The concept that needs to be revised.
What actions should be done to avoid the mistake next time.
Write an error log that should be simple enough for you. Divide your mistakes into four different types:
Lack of knowledge: You do not know the answer at all.
Wrong understanding of the question.
Lack of practical application: You know the theory but cannot apply it.
Too much time on the question.
Revise the list weekly.
This technique is more efficient than just doing mock tests and then not reviewing the mistakes.
Sample Practice Questions
Try these sample questions before moving to the full interactive quiz below. Each question includes the correct answer and explanation, similar to what you will experience in a complete AZ-104.
1. You are tasked with managing access to Azure resources for a team that includes contractors. Your organization uses Microsoft Entra ID for identity management. You need to grant the contractors temporary access to a specific resource group for three months, after which their access should automatically expire without manual intervention. Which Azure feature should you use to implement this requirement?
Permanent role assignment with a scheduled deletion reminder
✓ Azure role-based access control (RBAC) with a time-limited assignment using privileged identity management (PIM)
Azure resource locks combined with access reviews
Management groups with conditional access policies
Correct Answer: Azure role-based access control (RBAC) with a time-limited assignment using privileged identity management (PIM) Privileged Identity Management (PIM) allows you to create time-bound role assignments that automatically expire after a specified duration. You can assign contractors a specific Azure RBAC role (such as Contributor) on a resource group with an expiration date of three months, and the access will be revoked automatically without requiring manual intervention. Why the other options are incorrect: l Permanent role assignment with a scheduled deletion reminder: This requires manual action to remove the assignment and relies on someone remembering to do so. It does not provide automatic expiration. l Azure resource locks combined with access reviews: Resource locks prevent accidental deletion or modification but do not control access permissions. Access reviews help audit access but do not automatically expire role assignments. l Management groups with conditional access policies: Management groups are for organizing subscriptions hierarchically, and conditional access is primarily for authentication conditions (device state, location, etc.), not for automatic permission expiration.
2. Your organization is deploying a set of virtual machines in Azure using a standardized template. You have several different configurations needed for development, staging, and production environments, each with different VM sizes, storage types, and network security group rules. Rather than creating separate templates for each environment, you want to use a single parameterized template that can be deployed multiple times with different values. What approach should you use to deploy these VMs efficiently?
Create separate ARM templates for each environment and deploy them manually through the Azure portal
✓ Use a single Bicep file with parameters that define environment-specific values and deploy it with a parameters file for each environment
Create one large Azure Resource Manager (ARM) JSON template and manually edit the JSON before each deployment
Use Azure DevOps pipelines to deploy VMs without any template infrastructure
Correct Answer: Use a single Bicep file with parameters that define environment-specific values and deploy it with a parameters file for each environment Bicep is the modern Azure Infrastructure as Code (IaC) language that is more readable and maintainable than ARM JSON templates. By creating a single Bicep template with parameters (such as vmSize, environment, storageType, and nsgRules), you can deploy the same template to multiple environments by providing different parameters files. This approach is efficient, repeatable, version-controllable, and reduces template duplication and the risk of configuration drift. Why the other options are incorrect: l Separate templates for each environment: This creates duplication and maintenance overhead. When you need to update the template logic, you must do so in multiple places, increasing the risk of inconsistencies. l Manually editing JSON before each deployment: This is error-prone, time-consuming, and does not follow Infrastructure as Code best practices. It also makes it difficult to track what changed between deployments. l Using Azure DevOps pipelines without templates: While DevOps pipelines are useful for automation, they do not replace the need for Infrastructure as Code templates. Pipelines should orchestrate the deployment of well-defined templates.
6. Perform Security-related Tasks
Generally, during the cybersecurity test, you will need to complete certain tasks that will demonstrate your practical skills. You may have to analyze the system logs, network maps, and determine how to react to various cyber threats.
You can develop these skills by completing some basic tasks.
Analyze system logs: Look for unusual login attempts, unusual access times, and error codes.
Analyze network maps: Find out where the firewall/VPN is located in the network.
Incident handling process: Understand the procedure for dealing with security incidents.
Analyze user access rights: Figure out the reasons why users have different access restrictions.
Analyze security policies: Understand how security policies protect information belonging to the company.
You can do these things in authorized practice labs. Never run any tests on software on an unauthorized system. These small exercises will help you understand how security policies work in practice.
7. Adopt a Four-Week Retake Strategy
A well-planned study schedule may keep you on track. The following is a four-week schedule that you may follow if you have knowledge of all the basic topics.
Week 1: Evaluate Your Results
Study your previous score results.
Identify your weak areas.
Check for the current syllabus of the exam.
Prepare a daily schedule.
Week 2: Focus on Technical Areas
Study your two weakest areas.
Revise your technical terminologies.
Practice topic-based questions.
Enter your errors in an error log.
Week 3: Practice Your Knowledge
Practice questions from various topics.
Perform basic security tasks.
Review your networking and access control.
Check your previous mistakes.
Week 4: Perform Mock Test
Take mock test papers.
Check all your wrong answers.
Revise security terminology.
Practice your examination strategy.
You may adopt a schedule that exceeds four weeks as per your requirement. Don’t hurry with the topics just because you have a pre-set period to finish.
Your certification exam retake plan should give you enough time to improve your weak areas. Book the next test when your practice scores are steady, and you understand your mistakes.
8. Get Ready for Exam Day
Use the last few days for revision. Do not try to learn the full syllabus again. Before the test:
Check the latest exam topics.
Keep your required ID ready.
Check your test centre or online test setup.
Get enough sleep.
Read each question with care.
Pay attention to words such as first, best, and most likely.
During the test, remove the answers that are clearly wrong. Then compare the remaining options with the facts in the question. Do not add details that the question does not give you. Read the full question before you select an answer.
9. Improve Your Next Attempt Using Your First One
Your initial result can serve as the basis for developing a more effective strategy for your next attempt. Do not dwell exclusively on the scores you have received. Consider what you have learned and where there is a need to improve.
Failure in passing the exam for professional certification doesn’t mean that you shouldn’t try any more to achieve your career goals. It means that you have to reconsider your approach to preparation and develop a more solid foundation.
Stick to the officially set standards and monitor your progress in the course of preparation.
FAQs
1. When can I take a certification exam again?
It varies from one exam vendor to another. Some permit an immediate retake, while others require longer waiting periods. Study the retake policy prior to scheduling.
2. Should I revise the whole syllabus again in case of failure?
You need to revise the whole syllabus; however, pay more attention to your weaker areas. Let your score report guide you in doing so.
3. What security certification is best for beginners?
A basic security certification is suitable if you lack experience in IT. If you have some experience in networking and IT, then a general security certification could serve your purpose well. Otherwise, a platform-based certificate is recommended if you want to work with any particular cloud service.
4. How do I get to know that I am ready for another attempt?
You must be able to explain the major concepts without having to refer to your notes. In addition, you must be able to solve unseen practical questions and score consistently in timed mock exams.
Conclusion
The failure of an exam could help you know the areas where there is need for improvement. Review your results, follow the process for taking the test again, and allow sufficient time to prepare. Concentrate on the areas where you did not do well and monitor your progress weekly.
Having a good plan will help you prepare adequately. You may also use Certification Exam to explore the certification possibilities.
Here are the most popular certification exams... Try them now!